Abstract:Carbon capture, as a core technology for mitigating greenhouse gas emissions, the greatest challenge is the balance between separation performance and energy consumption. This study seeks to evaluate and screen the separation performance and energy consumption of four typical adsorbents (13X, Mg-MOF-74, activated carbon, and Lewatit VP OV 1065) in vacuum temperature swing adsorption (VTSA) and vacuum swing adsorption (VSA) through optimization approach, which will support in-depth research and decision-making on adsorption processes. A non-isothermal non-adiabatic numerical model was carried out to describe a novel 4-bed 10-step VTSA cycle developed on an exchange type adsorption unit (ETAU), and the model was validated by binary breakthrough and temperature swing experiments. A 4-bed 10-step VSA cycle was in turn established and investigated. Parametric analysis of the two cycles was performed by varying the operating variables including feed gas flow rate, recycle time, and purge-to-feed ratio. Process optimization of the multiplicative fraction evaluation function, simultaneously considering purity, recovery, and productivity, was achieved using a dual convergence algorithm. Results showed that all four adsorbents could achieve more than 90 % purity and recovery on the VTSA process employing the ETAU for post-combustion carbon capture, and the separation performance was substantially superior to that of the VSA cycle. Mg-MOF-74 obtained a CO 2 product with 97.90 % purity, 98.48 % recovery, and 5.48 mol/kg ads /hr productivity at a desorption temperature of 383.15 K; it has a specific heat consumption of 1.45 GJ th /ton and a specific power consumption of 0.55 GJ el /ton. The total energy consumption of 13X was slightly lower than that of amine adsorbents, giving 95.00 % purity, 97.60 % recovery, and 1.91 mol/kg ads /hr productivity. Relatively low desorption temperature is expected to introduce ultra-low-grade waste heat for partial heat source substitution, contributing to the energy sustainability of adsorption carbon capture technology.

Application of Electric Swing Adsorption in Capture of CO2 from Flue Gas

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis.

Challenges of electric swing adsorption for CO(2) capture

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Adsorption,capture and Separation of CO2 by Carbon-Based Adsorbents

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

The Advances of Adsorbents in the Field of CO_2 Capture

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture

Supercapacitive Swing Adsorption for Direct Air Capture

Technique Analyses and Research Progress of CO2 Separation from Flue Gas by Chemical Absorption

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Flue gas treatment via CO2 adsorption

Progress in Post-Combustion Technology for Carbon Dioxide Capture