Abstract:Co‐current flow is chosen to represent the collective performance of all flow patterns; A trade‐off between the purity of CO2 and the recovery factor is observed; Despite the reduction of purity, a higher amount of CO2 can be recovered with a larger membrane area; A sharp decline in power requirement is observed with increasing selectivity from 2 to 20. Direct air capture (DAC) of CO2 is becoming increasingly important for reducing greenhouse gas concentrations in the atmosphere. However, the cost and energy requirements associated with DAC make it less economically feasible than carbon capture from flue gases. While various methods like solid sorbents and gas–liquid absorption have been explored for DAC, membrane processes have only recently been investigated. The objective of this study is to examine the separation performance of a membrane unit for capturing CO2 from ambient air. The performance of a membrane depends on several factors, including the composition of the feed gas, pressure ratio, material selectivity, and membrane area. The single‐stage separation process with the co‐current flow and constant permeability flux model is evaluated using a commercial module integrated with a process simulator to separate a binary mixture of carbon dioxide and nitrogen to assess the sensitivity of selectivity on purity and recovery of CO2 in permeate, and power requirement. Additionally, three levels of CO2 reduction from the feed stream to the retentate stream (25%, 50%, and 75%) are studied. A trade‐off between purity and recovery factor is observed, and achieving high purity in permeate requires high concentration in the retentate.

Supercapacitive Swing Adsorption for Direct Air Capture

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Moisture Swing Frequency Response Method for Characterization of Ion-Transport Kinetics of Co2 Adsorption

Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis.

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Oxygen-assisted supercapacitive swing adsorption of carbon dioxide

New Insights into the Mechanism of Electrochemical CO2 Capture by Supercapacitive Swing Adsorption

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Scaling Supercapacitive Swing Adsorption of CO2 Using Bipolar Electrode Stacks

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Enhancing electrochemical carbon dioxide capture with supercapacitors

A Comparative Study of Different Sorbents in the Context of Direct Air Capture (DAC): Evaluation of Key Performance Indicators and Comparisons

Understanding the performance of membrane for direct air capture of CO2

Impacts of Supercapacitor Electrode Structure on Electrochemical CO2 Capture

Experimental study of CO2 capture from air via steam-assisted temperature-vacuum swing adsorption with a compact kg-scale pilot unit

Preparation and Kinetics of a Heterogeneous Sorbent for CO 2 Capture from the Atmosphere

K2CO3 on porous supports for moisture‐swing CO2 capture from ambient air