Abstract:<p>The effects of substituting W with γ′ formers (Al, Ti, Ta, Mo and Nb) on the microstructural stability of a base model alloy Co-20Ni-7Al-8W-1Ta-4Ti were studied using a high-throughput diffusion-multiple approach. A substantial amount of composition-microstructure data was obtained from a single sample, enabling deeper understanding of the alloying effects. It was found that alloy 15Al0W still contains stable γ′ phase at 1000 °C for 1000 h even with a W content of zero. However, the γ′ volume fraction of this alloy was far lower than other W-containing alloys, indicating that W plays an important role on retaining the stability of the γ′ phase. Except for Ti, substituting W with other γ′ forming elements promotes the precipitation of detrimental phases, with a potency of Nb > Ta≈Al > Mo > Ti. The Nb content should be carefully controlled due to its strong effect on inducing the precipitation of the χ phase. The literature data for W-free alloy systems were discussed in comparison to the current W-containing alloy system in order to analyze the role of W in stabilizing the γ′ phase at high temperatures. Furthermore, the γ′ strength and density of more than 300 alloys from the investigated diffusion multiple were analyzed using classic models established for Ni-base superalloys, to guide the alloy design aiming to achieve higher strength to weight ratio. The substitution of W with Ti or Al could significantly reduce the alloy density, but would also decrease the γ′ strength to some extents. These negative effects could be counterbalanced by moderate additions of Ta and Nb. This study will be helpful for the accelerated design of multi-component CoNi-base alloys to achieve light weight and high strength.</p>

Phase Stability and Yield Stress of Ni-base Superalloys Containing High Co and Ti

Phase Constituents and Compressive Yield Stress of Ni-Co Base Alloys

The Evolution of Η Phase in Ni–Co Base Superalloys

Thermodynamic Study on Equilibrium Precipitation Phases in A Novel Ni-Co Base Superalloy

Understanding the composition-dependent stability of η phase for future Ni-Co-based superalloys

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Phase Constituents in Ni–Al–Co–Ti Quaternary Alloys

High-Ti inducing local Eta-phase transformation and creep-twinning in CoNi-based superalloys

Microstructure evolution and mechanical properties of a new cast Ni-base superalloy with various Ti contents

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Precipitation and Phase Transformation Mechanism of Additive Manufactured Ni-Co Base Superalloy

The effects of Ti and Ta on the microstructure and high temperature deformation mechanisms of the CoNi-based superalloys

Microstructural Evolution and Mechanical Properties of a Ni-Based Superalloy, TMW-4

Investigation on γ′ stability in CoNi-based superalloys during long-term aging at 900 °C

Characterization of Phase Chemistry and Partitioning in a Family of High-Strength Nickel-Based Superalloys