Abstract:This study deals with the Nb–niobium silicide-based composites developed by the hot-pressing of Nb–Si–Ti ternary powder mixtures with a fixed Ti addition (6at.%) and Si content ranging from hypereutectic (11at.%) to near-eutectic compositions (18at.%). The effects of Si content, Ti addition and strain rates on the sample microstructural characterization, flexural strength, fracture toughness, quasi-static compressive deformation and failure processes were investigated. It was revealed that the volume fraction of silicides increased with increasing Si content, and most of the Ti atoms dissolved into the niobium silicides to form (Nb,Ti)5Si3 solid solutions instead of binary titanium silicides. The experimental evidence showed that a moderate improvement in the flexural strength, fracture toughness and compressive yield stress of the composites was achieved by the addition of Ti. Higher Si additions produced a much more remarkable enhancement in the compressive yield stress and bulk hardness, whereas both the flexural strength and fracture toughness decreased with increasing Si content owing to the existence of residual porosities in the samples. The composites showed remarkable superiority to the arc-melted Nb–Si alloys and monolithic niobium silicides in fracture toughness (8.3–13.0MPam vs. 4.5MPam), where the toughening effect was attributed mainly to crack bridging and crack deflection by the remaining ductile Nb phase. Moreover, quasi-static uniaxial compression tests at strain rates between 10–5 and 10–3s−1 indicated that the deformation behavior and failure processes were significantly affected by Si content and strain rates. The strain-rate-hardening behavior for all the strain rates was observed in the composite materials and the strain-rate sensitivity decreased with increasing Si content. At a lower strain rate, the composite materials with a hypoeutectic Si composition failed with a pseudoplastic response and at an angle of ∼45° off the compressive loading direction. However, in the case of higher strain rate and Si content, the brittle failure in the samples occurred through vertical splitting and spalling of fragments.

Interdiffusion behavior between Nb and MoSi2 intermetallic compound

A Kinetic Model of Diffusional Phase Transformations in Ternary Line Compounds and Determination of Diffusion Coefficients: Application to the Nb–Mo–Si System

Interdiffusion and Atomic Mobility in BCC-A2 Mo-Zr and Mo-Nb-Zr Alloys with Very Steep Composition Profiles

Interdiffusion of solute elements in the α-Fe phase of the Fe–Cr–Mo and Fe–Cr–Si ternary systems

Self-diffusion Mechanisms Based Defect Complexes in MoSi2.

Experimental study on phase relations in the Al-Mo-Nb ternary system

Experimental Investigation of Phase Equilibria in the Nb-Si-V Ternary System

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

"Anomalous" diffusion in multi-layer silicide systems

Energetic Effects of Dopants on the Eutectoid Decomposition of Nb–Siin Situcomposites

Molecular dynamics study of solid state interfacial reaction in the Ni-Mo system

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

Interdiffusion study in group IVB, VB and VIB refractory metal-silicon systems

Atomic diffusion and microstructural evolution at the Nb/TiAl heterogenous interfaces during annealing at elevated temperatures

Thermodynamic assessment of the Mo‐Si system

Interdiffusion and Phase Formation During Thermal Annealing of Ti/Mo Bilayers on Si Substrates

Nucleation of CoSi2 and MnSi1.7 in the Co/Mn/Si ternary system

Analyses of Eutectoid Phase Transformations in Nb–Silicide In Situ Composites

Nucleation of CoSi/sub 2/ and MnSi/sub 1.7/ in the Co/Mn/Si ternary system

Solidification behavior and microstructure evolution of Nb-Si-Mo alloy in ultrasonic field

Diffusion Behavior of Secondary Carbides and Subsequent Influence on Microstructure of NbC-Ni-Based Cermets