Abstract:SnTe is proposed to be an intriguing low-toxicity alternative to PbTe. Herein, we report the diminished lattice thermal conductivity (κL) and enhanced zT of SnTe by way of vacancy engineering. (SnTe)1-x(Sb2Te3)x (x = 0.03, 0.06, and 0.10) and (SnTe)1-y(Sb2Se3)y (y = 0.03 and 0.06) were synthesized by blending and sintering their solution-synthesized nano/microstructures (i.e., SnTe octahedral particles, Sb2Te3 nanoplates, and Sb2Se3 nanorods). Benefiting from the chemical reactions during sintering, single-phase SnTe-based solid solutions were formed when x or y is not higher than 0.06, into which tunable concentrations of Sn vacancies were introduced. Such vacancies significantly enhance phonon scattering, leading to the sharply reduced room temperature κL of 1.40 and 1.26 W m–1 K–1 for x = 0.06 and y = 0.06 samples, respectively, as compared to 3.73 W m–1 K–1 for pristine SnTe. Enabled by point defects with the highest concentration and SnSb2Te4 secondary phase, (SnTe)0.90(Sb2Te3)0.10 sample obtains the lowest κL of 0.70 W m–1 K–1 at 813 K. Ultimately, maximum zT values of 0.6 and 0.7 at 813 K are achieved in (SnTe)0.90(Sb2Te3)0.10 and (SnTe)0.94(Sb2Se3)0.06, respectively. This study demonstrates the effectiveness of vacancy engineering in improving zT of SnTe-based materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13651?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13651</a>.Chemicals; lattice thermal conductivity modeling; extra XRD, SEM, TEM, and EDS results; calculated temperature-dependent Lorenz number; and HAADF image corresponding to the EDS mapping (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13651/suppl_file/am0c13651_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improvement of Thermoelectric Performance of CoSb3−xTex Skutterudite Compounds by Additional Substitution of IVB-Group Elements for Sb

Possible reduction of lattice thermal conductivity in n-type CoSb2.875Te0.125 skutterudite originating from collaborative adjustment between Indium micro and α-WC nano inclusions

Enhanced High-Temperature Thermoelectric Performance in Te-Doped Electronegative Element-Filled Skutterudites via Suppressing Bipolar Effects and Enhanced Phonon Scattering

Enhanced Thermoelectric Performance in Ternary Skutterudite Co(Ge 0.5 Te 0.5 ) 3 via Band Engineering

A review of CoSb3-based skutterudite thermoelectric materials

High-Pressure Synthesis of Te-Ge Double-Substituted Skutterudite with Enhanced Thermoelectric Properties

Enhanced Thermoelectric Transport Properties of Electronegative-Element-Filled and (Ni, Te) Co-Doped Skutterudites through S Filling

Enhanced thermoelectric performance of skutterudite Co1−yNiySn1.5Te1.5−x with switchable conduction behavior

Thermoelectric properties of (Cu,Te) co-doped CoSb 3 synthesized by high-pressure and high-temperature

HPHT synthesis and enhanced thermoelectric transport properties of double-doped Co4Sb11TexSn1-x skutterudites

Thermoelelctric Properties of Nanostructured Skutterudite-Related Compounds

Enhanced power factor and suppressed lattice thermal conductivity of CoSb3 Skutterudite by Ni substitution and nanostructuring for high thermoelectric performance

Significant enhancement of electrical conductivity by incorporating carbon fiber into CoSb3 thermoelectric skutterudite fabricated by spark plasma sintering method

Achieving Enhanced Thermoelectric Performance in (SnTe) 1- x (Sb 2 Te 3 ) x and (SnTe) 1- y (Sb 2 Se 3 ) y Synthesized via Solvothermal Reaction and Sintering

Impurity Removal Leading to High-Performance CoSb 3 -Based Skutterudites with Synergistic Carrier Concentration Optimization and Thermal Conductivity Reduction

Nanostructuring and Thermoelectric Properties of Bulk Skutterudite Compound Cosb3

Solvothermal synthesis of nanosized CoSb 3 skutterudite

Improved Thermoelectric Performance in Ga and Te Co‐introduced Tetrahedrite Cu12Sb4S13

Thermoelectric Property of Fine-Grained CoSb3skutterudite Compound Fabricated by Mechanical Alloying and Spark Plasma Sintering

Enhanced Thermoelectric Properties of Co 1− X − Y Ni X + Y Sb 3− X Sn X Materials

Low Thermal Conductivity and Enhanced Thermoelectric Performance in in and Lu Double-Filled Cosb3 Skutterudites