Abstract:Filling guest atoms into the nanovoids of skutterudite compounds provides effective scattering for low-frequency phonons to reduce the lattice thermal conductivity. However, it is still difficult to simultaneously realize the full-spectrum phonon scattering and band engineering in the n-type skutterudites with higher thermoelectric performance. Here, we reveal that the combination of five types of element atoms in the lattice nanovoids brings about dense dislocations, abundant precipitated nanoparticles, and electronic band convergence in the n-type skutterudites. The Seebeck coefficient shows an increase with little deterioration on the carrier mobility due to the enhanced density of states near the Fermi level, leading to a 11% enhancement in the power factor at 823 K. The lattice thermal conductivity is significantly reduced to approach the glass limit due to the full-spectrum phonon scattering. As a result, a peak ZT value of about 1.7 at 823 K and an average ZT value of about 1.2 from 323 to 823 K are obtained. High thermoelectric performance combined with the structural optimization enables the simulated maximum energy conversion efficiency of the skutterudite module to reach up to 15.0%. Our finding opens a new dimension for doping atoms to achieve simultaneous optimization of electrical and thermal properties in polynary thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c06267?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c06267</a>.Materials and Methods; microstructure evolution mechanisms during the synthesis of n-type skutterudites; calculation of the electronic band structures; calculation of the lattice thermal conductivity; calculation of the actual energy conversion efficiency of the skutterudite thermoelectric module; anharmonicity parameters of filling elements; fitting parameters for the multiple-filled skutterudites; TEM images of dislocation loops; TEM images of dislocation walls; microstructure evolution from melt-spinning ribbons to bulk skutterudite materials; scanning TEM–EDS elemental mapping images of the precipitated nanoparticles; electronic band structures of Yb0.25Co4Sb12 and Ca0.25Co4Sb12; electronic band structures of Yb0.25In0.125Co3.75Fe0.25Sb12 and Yb0.25Al0.125In0.125Co3.75Fe0.25Sb12; energy dependence of the total electronic DOS; In-atom-centered maximally localized Wannier functions in the InCo4Sb12 crystal; BSE images of the resynthesized multiple-filled sample after three times of measurements or heat treatment; thermoelectric performance of the resynthesized multiple-filled sample after three times of measurements or heat treatment; thermoelectric performance parameters of n-type and p-type skutterudites used in the thermoelectric module simulation model; maximum output power and maximum energy conversion efficiency as a function of the geometry parameters of the thermoelectric leg; and hot-side temperature dependence of the internal resistance of the unicouple (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06267/suppl_file/am1c06267_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low Thermal Conductivity and Enhanced Thermoelectric Performance in in and Lu Double-Filled Cosb3 Skutterudites

Thermoelectric properties in double-filled skutterudites In xNdyCo4Sb12

High temperature thermoelectric and magnetic properties of InxNdyCo4Sb12 skutterudites

The Thermoelectric Properties of InxM0.2Co4Sb12 (m=ba and Pb) Double-Filled Skutterudites

Synthesis and High Temperature Thermoelectric Properties of Calcium and Cerium Double-Filled Skutterudites Ca0.1CexCo4Sb12

Synthesis and thermoelectric properties of double-filled skutterudites CeyYb0.5-yFe1.5Co2.5Sb12

Characterization of multiple-filled skutterudites with high thermoelectric performance

Enhanced thermoelectric performance of dual-element-filled skutterudites BaxCeyCo4Sb12

Multiscale Length Structural Investigation and Thermoelectric Performance of Double-Filled Sr0.2Yb0.2Co4Sb12: An Exceptional Thermal Conductivity Reduction by Filler Segregation to the Grain Boundaries

Enhanced thermoelectric figure of merit in indium and ytterbium double-filled skutterudite bulk materials through simultaneously optimising power factor and reducing thermal conductivity

Enhanced Thermoelectric Performance of N-Type Filled Skutterudite InxCo4Sb12

Synthesis and Thermoelectric Properties of Kyco4sb12

Raising the Thermoelectric Performance of Fe3cosb12 Skutterudites Via Nd Filling and In-Situ Nanostructuring

Thermoelectric Properties of Dual‐element‐filled Skutterudites LaxCa0.1Co4Sb12

Thermal Transport and Microscopic Dynamics in Filled Skutterudite YbFe4Sb12 Studied by Ab Initio Molecular Dynamics Simulation

Intrinsic Ultralow Lattice Thermal Conductivity of the Unfilled Skutterudite FeSb_3

Synthesis and Thermoelectric Properties of Sr-Filled Skutterudite Sryco4sb12

Boosting the Thermoelectric Performance of Yb-filled Skutterudites Through the Incorporation of YSb Nanoprecipitates

Efficient Si Doping Promoting Thermoelectric Performance of Yb-Filled CoSb3-Based Skutterudites

Multiple-Filling-Induced Full-Spectrum Phonon Scattering and Band Convergence Leading to High-Performance n-Type Skutterudites

Synthesis and thermoelectric properties of Nd-single filled p-type skutterudites