Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

Investigations on Aerodynamic Performance and Structural Optimization Design of Nozzle Governing Stage for Large Steam Turbines

Computational Fluid Dynamics Analysis Approach To The Aerodynamic Performance Of A Nozzle Controlling Stage For A 600mw Steam Turbine

Numerical Investigations on Aerodynamic Performance of Nozzle Control Stage of a 600MW Steam Turbine under Different Backing Pressure Conditions

Investigation on Aerodynamic Performance of Controlling Stages for Large Power Steam Turbines

Numerical Investigations on the Aerodynamic Performance of Turbine Stage and Rotordynamic Characteristics of Stator Seal with Consideration of Supplementary Steam

Investigations On The Flow Pattern And Aerodynamic Performance Of Last Stage And Exhaust Hood For Large Power Steam Turbines

Numerical Investigation on the Characteristics of the Guide Vane Stages in a Steam Turbine

Numerical investigation on off-design flow and temperature rise characteristics of steam turbine low pressure cylinder

Numerical Investigation on Flow Characteristics in Steam Turbine Low Pressure Cylinder and LPEH under Different Volume Flow Rate Conditions

Influence of Last Stage Turbine on Aerodynamic Performance and Condensation Characteristic of Low Pressure Cylinder

Effect of Oblique Stator on the Aerodynamic Performance and Erosion Characteristics of Governing Stage Blades in a Supercritical Steam Turbine

Numerical Investigation on Flow Characteristics of Low Pressure Exhaust Hood under Off-Design Conditions for Steam Turbines

Aerodynamic Numerical Investigation Of Low-Pressure Steam Turbine Last Stage Under Low Load Conditions With Mode Decomposition Methods

Aerodynamic Optimisation of a Low-Pressure Multistage Turbine Using the Response-Surface Method

Study on Aerodynamic Optimization Design of Multistage Axial Turbine under Multiple Working Conditions

Numerical Investigations of Flow Features in a Low Pressure Steam Turbine Last Stage under Different Mass Flow Rates

Test Study on Aerodynamic Performance of Large-enthalpy Drop Stator of Steam Turbine Cascade

Review on High Loaded Blade and Large Enthalpy Drop Stage in Application of Turbomachinery

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Nozzle Passage Aerodynamic Design to Reduce Solid Particle Erosion of a Supercritical Steam Turbine Control Stage

Numerical Investigations on the Aerodynamic Performance of Last Stage – Exhaust Hood for Steam Turbines