Abstract:This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious "sharp corner" in the pre-deformation direction and "flat" in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.

Young'S Modulus Surface and Poisson'S Ratio Curve for Orthorhombic Crystals

Young's modulus surface and Poisson's ratio curve for cubic metals

Representation Surfaces of Young's Modulus and Poisson's Ratio for BCC Transition Metals

Anisotropic Elasticity in Hexagonal Crystals

General compliance transformation relation and applications for anisotropic cubic metals

Single-crystal Elasticity of the Rhodochrosite at High Pressure by Brillouin Scattering Spectroscopy

2D and 3D cubic monocrystalline and polycrystalline materials: their stability and mechanical properties

Measurement Modulus of Elasticity Related to the Atomic Density of Planes in Unit Cell of Crystal Lattices

Nonlinear Elasticities of Octagonal and Dodecagonal Quasicrystals

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Elastic Anisotropy of Molecular Crystals Calculated by an Elastic Model Established on a Supramolecular Structural Unit

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Cubic Single Crystal Representations in Classical and Size-dependent Couple Stress Elasticity

Directions Dependence Research on the Equivalent Young’s Moduli of an Octet-truss Lattice Materials

Yield vertices of BCC crystals for {110}〈111〉, {112}〈111〉 and {123}〈111〉 multiple slip

Study of Static Flexural Strength Anisotropy of Yttrium Calcium Oxyborate Crystals

Anisotropy of the Reflectivity Spectra of A Bisrcacuo Single-Crystal Within the (001)-Plane

Extended Universality of the Surface Curvature in Equilibrium Crystal Shapes

Anisotropic Elasticity in A Textured Cubic Film Plane

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

Yield Criteria of Hexagonal Symmetry in the Π -Plane