Abstract:Octet-truss lattice materials have excellent potential for use as lightweight structures due to their high strength and stiffness, but low relative density. Octet-truss lattice specimens fabricated by stereolithography technique with a photopolymer resin were studied in this research. The unit cell orientation effects on the compressive fatigue behaviors of octet-truss lattices were studied using experimental analysis and computer simulation. A detailed comparison was made between the failure modes of static and fatigue failures, and the deformation mechanisms of lattices in different orientations under compressive cyclic load were determined. Both the static mechanical properties and fatigue properties of octet-truss lattices are highly dependent on the lattice orientation. When normalized with respect to their orientation-dependent Young's moduli, the fatigue endurance of lattices in different orientations conforms very well (R2 = 0.88) to a single S-N curve described by a power law. Finally, the differences in fatigue performance between lattices in different orientations were explained and a simple compression–compression fatigue mechanism was determined.Compressive fatigue behaviors of octet-truss lattice structures in three different unit cell orientations were investigated and compared in this research. Orientation-Z structure has the best resistance to fatigue failure in comparison to other orientations.The absolute S–N curves of lattices in different orientations were normalized by their Young's moduli into a curve that can be expressed by one single power law.The mechanism of compressive fatigue failure of octet-truss lattice structures in different orientations was determined. Comparing with fatigue crack initiation and propagation in struts, cyclic ratchetting made dominant contribution to the compressive fatigue failure.The differences between the fatigue resistances of lattices in three orientations were explained by comparing the mechanical response in the finite element model.

Directions Dependence Research on the Equivalent Young’s Moduli of an Octet-truss Lattice Materials

Form and Structural Properties of a New Lattice Shell String Structure

Compressive fatigue characteristics of octet-truss lattices in different orientations

Isotropic Octet-Truss Lattice Structure Design and Anisotropy Control Strategies for Implant Application

Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle

The family of elastically isotropic stretching-dominated cubic truss lattices

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Vibration Characteristics Research of Sandwich Structure with Octet-truss Lattice Core

Mechanical Properties And Design Of Lattice Composites And Structures

Nonlinear mechanical properties of lattice truss materials

Study on mechanical properties of a hierarchical octet-truss structure

Mechanical properties of a new type of plate–lattice structures

Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design

The Mechanical Properties Of Hierarchical Truss-Walled Lattice Materials

Analytical design of stretching-dominated truss lattices with tailored elasticity from transversely isotropic base materials

Compression, Shear and Bending Performance of X-type Lattice Truss Panel Structure by Theoretical Method and Simulation

The Influence of Strut Waviness on the Tensile Response of Lattice Materials

Coordination-dependent Surface Strain and Rational Construction of Robust Structures.

Truss and plate hybrid lattice structures: Simulation and experimental investigations of isotropy, large-strain deformation, and mechanisms

Elasticity of Anti-Tetrachiral Anisotropic Lattices

A class of elastic isotropic plate lattice materials with near-isotropic yield stress