Abstract:The theory of plasticity operates with different yield criteria of incompressible behavior for isotropic materials. Mostly known are the criteria of Tresca, Schmidt-Ishlinsky and von Mises. The first two criteria have a hexagonal symmetry, and the criterion of von Mises has a rotational symmetry in the pi-plane. All these criteria do not distinguish between tension and compression (no strength differential effect), but numerous problems are treated in the engineering practice using these criteria. Within this paper, the yield criteria with hexagonal symmetry for isotropic incompressible materials are compared. For this purpose, their geometries in the pi-plane will be presented in polar coordinates. The radii at the angles of 15(au broken vertical bar) and 30(au broken vertical bar) will be related to the radius at 0(au broken vertical bar). Based on these two relations, well-known criteria will be shown in one diagram. The extreme shapes of the yield surfaces are restricted by two criteria: the unified yield criterion (UYC) and the multiplicative ansatz criterion (MAC). The examinations of the UYC and MAC depict a linear combination of these extreme yield surfaces. The resulting criterion with two parameters describes all possible convex forms of hexagonal symmetry. On the other hand, this criterion has one disadvantage: It is not possible to solve explicitly the equation for the equivalent stress. Other known criteria (Sokolovsky, Ishlinsky-Ivlev, Dodd-Naruse, Drucker) are depicted in the proposed diagram and compared with the above mentioned criteria. Further criteria are derived from the consideration of solids with orthogonal symmetry planes in the shear stress space. New criteria are introduced for practical applications. The constraints of convexity are established for them. The proposed consideration of the yield criteria simplifies the selection of a proper criterion. The extreme solutions for the analysis of construction parts can be found using these criteria.

Representation Surfaces of Young's Modulus and Poisson's Ratio for BCC Transition Metals

Young's modulus surface and Poisson's ratio curve for cubic metals

Young'S Modulus Surface and Poisson'S Ratio Curve for Orthorhombic Crystals

Anisotropic Elasticity in Hexagonal Crystals

General compliance transformation relation and applications for anisotropic cubic metals

2D and 3D cubic monocrystalline and polycrystalline materials: their stability and mechanical properties

Predicting Grain Boundary Structure and Energy in BCC Metals by Integrated Atomistic and Phase-Field Modeling

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Directions Dependence Research on the Equivalent Young’s Moduli of an Octet-truss Lattice Materials

A new analytical surface energy model for arbitrary (h k l) planes in BCC and FCC metals

Anisotropy Analysis of the Surface Energy of Hcp (c/a<1.633) Metals

User-friendly anisotropic hardening function with non-associated flow rule under the proportional loadings for BCC and FCC metals

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

Yield vertices of BCC crystals for {110}〈111〉, {112}〈111〉 and {123}〈111〉 multiple slip

Pseudo-fivefold diffraction symmetries in tetrahedral packing.

A Method of Crystal Plasticity Finite Element Modelling in BCC, FCC and HCP Metals

Yield Criteria of Hexagonal Symmetry in the Π -Plane

Elastic properties of 4d transition metal alloys: Values and trends

Dependence of Stresses on Grain Orientations in Bcc Polycrystalline Films on Substrates

Anisotropic Elasticity in A Textured Cubic Film Plane

First-principles calculations of pure elements: Equations of state and elastic stiffness constants