Abstract:Based on the analytical solution of Crouch to the problem of a constant discontinuity in displacement over a finite line segment in an infinite elastic solid, in the present paper, the crack-tip displacement discontinuity elements, which can be classified as the left and the right crack-tip elements, are presented to model the singularity of stress near a crack tip. Furthermore, the crack-tip elements together with the constant displacement discontinuity elements presented by Crouch and Starfied are used to develop a numerical approach for calculating the stress intensity factors (SIFs) of general plane cracks. In the boundary element implementation, the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. The method is called the hybrid displacement discontinuity method (HDDM). Numerical examples are given and compared with the available solutions. It can be found that the numerical approach is simple, yet very accurate for calculating the SIFs of branched cracks. As a new example, cracks emanating from a rhombus hole in an infinite plate under biaxial loads are taken into consideration. The numerical results indicate the efficiency of the present numerical approach and can reveal the effect of the biaxial load on the SIFs. In addition, the hybrid displacement discontinuity method together with the maximum circumferential stress criterion (Erdogan and Sih) becomes a very effective numerical approach for simulating the fatigue crack propagation process in plane elastic bodies under mixed-mode conditions. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the HDDM. Crack propagation is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented.

Stress-Intensity Factor For A Semi-Elliptical Surface Crack At The Thread Root Of A Screwed-Pipe Joint

Empirical Solution of Stress Intensity Factors for the Inclined Inner Surface Crack of Pipe under External Pressure and Axial Compression

Weight Function Method for Stress Intensity Factor of Internal Surface Semi-elliptical Crack in Elliptical Holes

Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface

Stress Intensity Factor Solutions for Circumferential Surface Cracks with Large Aspect Ratios in Pipes Subjected to Global Bending

Calculation of Stress Intensity Factor for Annular Double Cracks on Inner Surface of Pipeline

The Simplified Calculation Method of Stress Intensity Factors of Surface Cracks in T-butt Joint

Stress Intensity Factors of Cracks Emanating from A Surface Square Hole in Infinite Body in Tension

Numerical Analysis of Stress Intensity Factor of Surface Inclined Cracks at Intersection of Cylindrical Vessels and Nozzles

Stress intensity factor calculation for surface cracks at weld toe of sphere-cylinder shells

Research on the stress intensity factor calculation of multi-elliptical hole-edge crack

An Effective Method of Stress Intensity Factor Calculation for Cracks Emanating from A Triangular or Square Hole under Biaxial Loads

Calculation Of Stress Intensity Factors For Surface Cracks In A 3-Dimensional Body By The Sub-Region Mixed Fem

Discussion on Calculation of the Local Flexibility Due to the Crack in a Pipe

Solutions of Stress Intensity Factors of Subsurface Cracks

Study on Stress Intensity Factor of Girth Weld with Crack Defects

An Efficient and Accurate Numerical Method of Stress Intensity Factors Calculation of a Branched Crack

Development of Stress Intensity Factors for Deep Surface Cracks in Pipes and Plates

Dislocation-based Semi-Analytical Method for Calculating Stress Intensity Factors of Cracks: Two-dimensional Cases

Fatigue Crack Growth Calculation of a Surface Crack in a Ship Angular Joint

3D BE Analysis on Stress Intensity Factor of a Fatigue Crack in a Welded T-joint