Abstract:Aiming at investigating the hydrodynamic performances of surface piercing propeller,CFD method was applied to simulate its flow filed. The numerical results were compared with the experimental data. A right-hand surface piercing propeller with five blades was modeled. Its flow field was solved through Reynolds Averaged Navier-Stokes equation(RANS). SST k-ω turbulence model was utilized to calculate Reynolds stresses in the RANS equations. The Open Channel Flow model in Fluent was employed to simulate the gas-liquid flow in cavitation tunnel. The free surface was captured through the VOF method and the rotation of the propeller was handled by means of sliding mesh. The results indicate that the wake field shape is in satisfactory agreements with the experimental data. It proved the validity of CFD method to predict the performance of surface piercing propeller. In less depth of immersion,numerical simulation can supply a good prediction of propeller performance. With the increase of the immersing depth,the results are accurate enough for thrust coefficient and efficiency. However there are some deviations for torque coefficient prediction. The numerical results can provide the fluctuating curve of macroscopic forces and the pressure distribution contour of a fully-submerged blade. The process of entry and exit of the water can also be researched in detail.

Discussion about FLUENT Software by the Numerical Calculation of Several Types of Vessels' Resistance

Investigation on Some Factors Effecting Ship Resistance Calculation with CFD Code FLUENT

Study on Numerical Simulation of Hydraulic Regime of Single Stack Drainage System

Numerical simulation of water entry using CIP model

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Flow Field Analysis of Ship Exhaust System Based on CFD

Discussion of Mesh Generation Method for Ship Resistance Calculation

A Numerical Study on the Resistance Prediction of a Medium Speed Craft

Preliminary Numerical Investigation of Effect of Interceptor on Ship Resistance

A review of the numerical strategies for solving ship hydroelasticity based on CFD-FEM technology

Research on Factors of a Flow Field Affecting Catamaran Resistance Calculation

Research on Mesh Generation Effecting Resistance Calculation

Numerical Simulation of Ship Free Roll Decay Motion in Viscous Flow

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Discussion of Grid Generation for Catamaran Resistance Calculation

Numerical study of the hydrodynamic performances of surface piercing propeller

Application Progress of Computational Fluid Dynamic Techniques for Complex Viscous Flows in Ship and Ocean Engineering

Numerical Simulation of Viscous Flow Around High Speed Monohull and Trimaran Ships

Verification and validation of numerical calculation of ship resistance and flow field of a large tanker

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

Numerical Analysis of Fluid Flow Around Ship Hulls Using STAR-CCM+ with Verification Results