Analysis of Influential Factors on Heat Transfer in Phase-Change Region for MCPCM Slurry

WU Jia-feng,HAO Ying-li,SHI Ming-heng

DOI: https://doi.org/10.3969/j.issn.1671-8097.2006.04.007

2006-01-01

Journal of Thermal Science and Technology

Abstract:The phase-change process for the microencapsulated phase-change material(MCPCM) slurry is the key factor affecting the heat transfer enhancement and the engineering application.In this paper,the Euler-Euler model was used to numerically analyze the influences of the particle volume fraction,the diameter of tube and the Reynolds number on the phase-change region.It is found that the length and the total heat absorption of the phase-change region increased significantly with the increasing of these three factors.The length of the phase-change region is also affected by the inlet temperature and the boundary conditions.The heat storage capacity of MCPCM slurry is almost the same,but the length and the total heat absorption in the phase-change region of the slurry will decrease with the increase of the phase-change temperature of the core metrical in the same Re Number.The inlet temperature is one of the most important factors to dominate the melting rate.The length as will as the temperature raise and total heat absorption of the phase-change region increase linearity with the entrance super-cooling of the slurry.In the constant temperature boundary conditions,the length of the phase-change region can meet the super-heat temperature of the wall in power curve,and the temperature raise and total heat absorption of the phase-change region will increase with increasing of the super-heat temperature of the wall.