Abstract:This article details a method for preparing cermet matrix composites via Fast hot pressing (FHP) sintering technology and emphasizes their potential use in extremely high-temperature settings. The material primarily consists of NiCr alloy, Cr3C2, and LaF3. An in-depth investigation was conducted on the tribological properties of the specimen by conducting sliding tests against a Si3N4 ball at varying temperatures, including room temperature (RT), 400 °C, 600 °C, and 800 °C. Advanced techniques such as scanning electron microscopy, micro-XRD, and micro-Raman spectroscopy were employed to examine the friction surfaces formed under different frictional temperatures. The findings reveal a uniform composition and high density within the composites. It is noteworthy that as the LaF3 content increases, the hardness of the ceramic phase diminishes. Conversely, the hardness of the alloy phase augments with the addition of LaF3, provided that its content remains below 15 wt%. The composite material containing 15 wt% LaF3 demonstrates superior hardness values, with the ceramic phase reaching HV1412 and the alloy phase achieving HV384. Furthermore, the coefficient of friction of the composite material was evaluated. The coefficient of friction of the composite is between 0.74 and 0.4 and the wear rate is 4.46 × 10−6–5.72 × 10−5 mm3N−1m−1 from room temperature to 800 °C. The lubrication behavior at low temperature is mainly attributed to the lubricating effect of LaF3, and at high temperature it is due to the tribochemical reaction to form LaCrO3 with good lubricating properties, which plays a synergistic lubricating role with Cr2O3.

Tribological Behavior of Fe-Mo-Graphite and Fe-Mo-Ni-Graphite Composites at Elevated Temperature

High-Temperature Friction and Wear Behavior of Nickel-Alloy Matrix Composites with the Addition of Molybdate

Investigation of the elevated temperature tribological property and wear mechanism of Fe‐15Cu‐0.8C materials containing Mo‐coated MoS2 powders

Microstructure and tribological properties evolution of Ni-Mo-SrSO 4 composites as a function of Mo contents at different temperatures

Effect of Temperature on the Friction and Wear Behavior of Electroless Ni–P–MoS2–CaF2 Self-Lubricating Composite Coatings

High temperature tribological behaviors and wear mechanisms of NiAl-MoO3/CuO composite coatings

High-temperature Tribological Properties of the Novel NiCr(MoNb)x-Ag Self-Lubricating Composite Films

High temperature tribological performance of nickel-based composite coatings by incorporating multiple oxides (TiO2–ZnO–MoO3)

Tribological behavior of NiCrW-based self-lubricating composites against IC10 alloy under high temperature and extremely slow sliding speed

Improving the tribological properties of ZrO2(Y2O3)-graphite composites at high temperature through three-dimensional continuous structure

Tribological Behavior Of Graphene Reinforced 600 Degrees C High Temperature Titanium Alloy Matrix Composite

Effect of the Ni coated graphite powders addition on the properties of the Fe-based solid self-lubricating composites

High temperature and room temperature tribological behaviors of in-situ carbides reinforced Ni-based composites by reactive sintering Ni and Ti2AlC precursor

Tribological Properties of Iron-Based Powder Composite Materials with Addition of Graphite, Alumina and Zirconia Nanoparticles

High-Temperature Tribological Behavior of Fast-Hot-Pressed NiCr/Cr3C2-LaF3 Self-Lubrication Composite

Enhanced Elevated-Temperature Tribological Properties and Microstructure of Co-continuous Iron Foam/SiC/Al-Si Dual-Reinforced Composites Fabricated by Vacuum-Assisted Infiltration

Microstructures and Properties of Nanostructured TiN/MoS2/Ag Composite Film Prepared by Pulsed Laser Deposition

Tribological investigation into nickel-coated graphite polytetrafluoroethylene composites

Tribological behaviors of nano-schistose MSH in phosphate/graphite composite lubricating coatings under different friction temperatures

2D Mo2CTx Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures

Tribo-induced microstructural changes and associated wear mechanisms of CoFeNi 2 medium entropy alloy at elevated temperatures