Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The Cu base composites play a key role in multiple industrial applications such as bearing materials and carbon brushes owing to their superior thermal, mechanical and tribological features. Therefore, in the present investigation, synergetic influence of nano titanium carbide (TiCnp) and graphite particles (Grp) on tribological behaviour of Cu base self-lubricating composites have been studied. The composites with fixed 5wt% of Grp and varying amounts (1.5wt% to 4.5wt%) of TiCnp were prepared via flake powder metallurgy (flake PM) technique. The sintered samples were characterized by different techniques for phases, physical, morphological and mechanical properties. Pin-on-disc (POD) tribotester has been used to analyse the tribological behaviour of composites in dry sliding condition by varying loads (10 N to 30 N) and sliding velocities (0.75 m/s and 1.5 m/s) for a fixed sliding distance of 2000 m. The results indicate the successful formation of Cu-Grp and TiCnp-reinforced Cu-Grp composites. With addition of Grp, the wear rate and coefficient of friction (COF) of Cu matrix is reduced. The wear rate is further reduced with the incorporation of TiCnp particles. But, the COF shows the enhancement. The composite having 5wt% Grp–4.5wt% TiCnp shows the minimum wear and maximum hardness. The energy-dispersive spectroscopy (EDS) elemental mapping of worn surfaces indicates that TiCnp mechanically interlocks the graphite at the interface and prevent its removal and reduces the wear rate. The worn surface investigation also shows that the dominant mechanism of wear for pure Cu sample is delamination in nature. However, the mechanism of wear for TiCnp-reinforced composites is a combination of abrasive and delamination wear.

Effect of the Ni coated graphite powders addition on the properties of the Fe-based solid self-lubricating composites

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Friction and Wear Behavior of Electroless Wear-Resistant and Self-Lubricating Ni-P Composite Coatings

Tribological Properties of Iron-Based Powder Composite Materials with Addition of Graphite, Alumina and Zirconia Nanoparticles

Tribological properties of Ni–P-multi-walled carbon nanotubes electroless composite coating

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Improving tribological performance of metallic coatings: A synergy of gradient structure and solid lubricant modification

Effect of TiB2 Content on Properties of Nickel-Coated Graphite Self-Lubricating Coating Prepared by Laser Cladding

Synergetic influence of TiCnp and graphite particles on tribological performance of Cu based composites prepared by flake powder metallurgy

Preparation and tribological properties of Ni-P electroless composite coating containing inorganic fullerene-like WS2 nanomaterials

The influence of size and distribution of graphite on the friction and wear behavior of Ni–graphite coatings

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

Influence of Cu Content Variation on the Tribological Properties of Ni60CuMo with Sandwich-Structured Composite Coatings by Laser Cladding

Effect of nano-Cu-loaded graphene fillers on tribological properties of PTFE based composite coatings

Effects of Fe and graphite on friction and wear properties of brake friction materials for high-speed and heavy-duty vehicles

Effect of Ti3SiC2 replacing graphite on the microstructure and properties of Cu-Sn matrix composites

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

Microstructure and Wear Resistance of a Composite Coating Prepared by Laser Alloying with Ni-Coated Graphite on Ti-6Al-4V Alloy

Effect of Y2O3 content on microstructure and properties of Ni-based self-lubricating composite coating

Highly efficient enhancement of mechanical and tribological properties of Cu-based composites by addition of graphene-loaded Ni metal particles

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants