Abstract:The continuous development and application of laser technology, and the increasing energy and power of laser output have promoted the development of various types of laser optical systems. The optical components based on quartz materials are key components of high-power laser systems, and their quality directly affects the load capacity of the system. Due to the photothermal effect when the laser interacts with the quartz material and generates extremely high temperatures in a short period of time, it is impossible to experimentally solve the phenomena and physical mechanisms under extreme conditions. Therefore, it is very important to select a suitable method to investigate the thermal effect of intense laser interaction with quartz materials and explain the related physical mechanism. In this study, a three-dimensional quarter-symmetric laser heating quartz material geometry model by using nonlinear transient finite element method was established, and its transient temperature field distribution of the quartz material after being heated by a 1,064 nm continuous laser was investigated. In addition, the influence of different laser parameters (laser spot radius, heat flux and irradiation time), material parameters (material thickness, material absorption rate of laser) on the thermal effect of heating quartz material were also studied. When the laser heat flux is 20 W/cm2, the diameter of the laser spot is 10 cm, the irradiation time is 600 s and the thickness is 4 cm, the temperature after laser heating can reach 940.18°C, which is far lower than the melting point. In addition, the temperature maximum probes were set at the overall model, spot edge and rear surface respectively, and their temperature rise curves with time were obtained. It is also found that there is a significant hysteresis period for the rear surface temperature change of the quartz material compared with the overall temperature change due to heat conduction. Finally, the method proposed can also be applied to the laser heating of other non-transparent materials.

Laser Beam-Induced Dynamic Gratings in Α-Quartz

Dynamic Gratings in Kdp Induced by Piezoelectric Vibrations at Optical Frequencies

Self-modulation of light in piezoelectric crystals

Non-thermal lattice dynamics in α-quartz induced by femtosecond laser pulses: An ab initio study

Study of piezo-induced surface vibration in solids using atomic force probe

Self-assembled Three-Dimensional Periodic Micro-Nano Structures in Bulk Quartz Crystal Induced by Femtosecond Laser Pulses.

Fiber Grating Sensor Using Dynamic PZT Modulation

Infrared Pulsed Picosecond Laser-Induced Plasma-Assisted Ablation of Micro-textures on Quartz Surface

Liquid-Assisted Femtosecond Laser Precision-Machining of Silica.

Self-Pulsation Dynamics in GaAs/AIGaAs Quantum Cascade Lasers

Achieving amorphous micro-nano superhydrophobic structures on quartz glass with a PTFE coating by laser back ablation

Sub-diffraction-Limit Voids in Bulk Quartz Induced by Femtosecond Laser Pulses

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Simulation study on the thermal effect of continuous laser heating quartz materials

Mechanical and optical nanodevices in single-crystal quartz

Nd:YAG Laser Longitudinal Mode Splitting Phenomenon by Intracavity Crystal Quartz Plate

Strong terahertz pulse induced Pockels and Kerr effect in crystalline quartz for ultrafast pulse switching

Reflection and Transmission Spectra of Dynamic Optical Fiber Gratings

One-Step Femtosecond Laser Stealth Dicing of Quartz

Femtosecond laser-assisted fabrication of piezoelectrically actuated crystalline quartz-based MEMS resonators

High-performance amplified spontaneous emission in inorganic CsPbBr3 perovskite thin films grown on engineered quartz substrates