Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

Flocculation Experiment of Nano-material Complicated with Inorganic Flocculants

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Effect of nitrate or sulfate on flocculation properties of cationic polymer flocculants

Polyaluminum Chloride-Functionalized Colloidal Gas Aphrons for Flotation Separation of Nanoparticles from Water.

Preparation and Application of Slag Compound Flocculant

An Experiment on Using Modified Starch Flocculant and PAC Complex to the Wastewater Treatment

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant

Screening on Complexation and Applicatiom of Compound Microbial Flocculant and Chemical Flocculant

Insight into the purification of algael water by a novel flocculant with enhanced branched nanochitosan structure

Interface dynamics in dewatering processes of high-water-content slurry flocculated with PAC

Flocculation performance evaluation and flocculation mechanism study of PAC/PMAPTAC composite flocculant in dyeing wastewater

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties

Enhanced Flocculation As the Pretreatment for Biopollutant Laboratory Wastewater

Efficient Flocculation of an Anionic Dye from Aqueous Solutions Using a Cellulose-Based Flocculant

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Characterization of the Flocculation Process from the Evolution of Particle Size Distributions

The Flocculating Properties of Chitosan-Graft-Polyacrylamide Flocculants (Ii)-Test in Pilot Scale