Fatigue Notch Strengthening Effect of Nickel-based Single Crystal Superalloys under Different Stress Ratios
Jundong Wang,Xiangqian Xu,Hao Lu,Lu Zhang,Yeda Lian,Zhixun Wen,Zhufeng Yue
DOI: https://doi.org/10.1016/j.euromechsol.2024.105471
2025-01-01
Abstract:Nickel-based single crystal superalloys (Ni-SXs) are widely used in turbine blades of aircraft engines. With the increasing demand for higher temperature-bearing capacity, the introduction of film cooling holes, impingement holes, and trailing edge slots for cooling induces stress concentration, which compromises the structural integrity of the blades, generates complex multiaxial stress states, and adversely affects their operational performance. In this study, Ni-SXs, DD6, was utilized to investigate the influence of stress ratios on fatigue performance under complex stress states. Low cycle fatigue (LCF) tests were carried out at different stress ratios with stress concentration coefficient Kt= 1.0, 2.0 and 3.0. The results indicate that the notched specimens exhibit a significant fatigue notch strengthening effect under high stress ratios. The fracture surface and microstructure also indicate that under high stress ratios loading, the notches exhibit significant creep failure characteristics. This means that the main cause of fatigue notch strengthening is similar to creep notch strengthening effect. A macroscopic anisotropic constitutive model coupled with damage was developed and applied to finite element analysis of notched specimens. The results demonstrate that as the stress ratio rises, the stress relaxation effect at the notch becomes more pronounced, yet the level of damage diminishes. Additionally, a stress-equivalent model based on Bridgman stress was proposed, which effectively unifies the lifetime trends of notched and smooth specimens, predicting lifetimes within a threefold error band.