Abstract:Performances of point contact EHL on multilayered or coated substrates have been analyzed in this paper via computer simulations, with emphasis on comparing the effects of Newtonian and non-Newtonian lubricants. The lubrication system consists of a rigid ball in contact with a smooth coated flat. The coating is perfectly bonded to an elastic substrate and it has a uniform thickness. The rigid ball has surface velocity U relative to the contact point. The hydrodynamic pressure p is governed by a generalized Reynolds equation in which the non-Newtonian effects of lubricants are characterized by two factors whose values are determined based on lubricant rheology. The Papkovich-Neuber potentials were employed to get the response functions in frequency domain for layered contact problems, and the influence coefficients relating pressure to surface displacements and stresses can be obtained via invert Fourier transform. The surface deformation was then calculated in terms of the pressure-displacement influence coefficients and the DC-FFT method was used to speed up the computation. The distributions of pressure, film thickness and subsurface stress have been analyzed for lubricants with different rheological behaviors, from which pressure and film thickness profiles along the rolling direction are calculated for Newtonian and Non-Newtonian lubricants. The central film thickness become thicker for stiffer coatings in the case of Newtonian lubricants, but the trend is reversed for Non-Newtonian lubricants. The surface stresses along the rolling direction show a spike corresponding to the pressure, which is more significant with stiffer coatings in the Newtonian case, but the spike is less visible for Non-Newtonian lubricants.

Analysis of Isothermal Elastohydrodynamic Lubrication with Surface Waviness

Micro-Elastohydrodynamics Lubrication of Point Contacts with Coexistence of Longitudinal and Transverse Roughness

Understanding the Influences of Multiscale Waviness on the Elastohydrodynamic Lubrication Performance, Part II: the Partial-Film Condition

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Numerical Analysis Of Point Contact Ehl On Coated Substrates

Analysis on Lubrication Contact Characteristics of Imperfect Transversely Isotropic Coating

Effects of differential scheme and viscosity model on rough-surface point-contact isothermal EHL

Numerical Analysis of Transient Elastohydrodynamic Lubrication of Helical Gears

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

A Computer Thermal Model of Mixed Lubrication in Point Contacts

A General Model for Microelastohydrodynamic Lubrication and Its Full Numerical Solution

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

A mixed soft elastohydrodynamic lubrication model of textures in a rotary lip seal

Effects of Surface Waviness and Dimple on Elastohydrodynamic Lubrication

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts

Modelling for Water-Based Liquid Lubrication with Ultra-Low Friction Coefficient in Rough Surface Point Contact

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller