Abstract:In order to improve the reliability of the system, the redundancy technology is introduced into the design of permanent magnet BLDCM. Sections 1 through 3 of the full paper explain our design, computer simulation and experimental research; we believe that our design is effective. The core of section 1 consists of: (1) two kinds of stator structure are designed, including one slot and two slots; (2) the mathematical model of the motor is set up; the winding inductance is analyzed and calculated, and the relationship between the winding inductance and mutual inductance is deduced. The core of section 2 is that, according to the mathematical model, the parameters of the motor are designed and the rotational speed and torque are simulated. The core of section 3 consists of: (1) the motor is tested on the MAGTROL testing system; (2) the mechanical characteristic curves of both kinds of stator structure under different working modes are compared. The simulation results are given in Figs. 3 through 6 and the experimental results are given in Figs. 7 through 12. Both the simulation and the experiment results show that; (1) the motor of each kind can achieve good dynamic characteristics and the torque is increased by 100% with two sets of windings; (2) two sets of winding did not affect motor performance, but it did indeed greatly improve the system reliability.

Research on Control System of Multi-Brushless DC Motors Based on CAN

Design of Control System of Airborne Redundant Generators Based on CAN-Bus

Research on Distributed Control System of Multi-Motor Based on CAN

Control System Design of Redundancy High Voltage BLDCM

Design of BLDCM Controller Applied in Test Based on CAN

A Novel Method for the Control of Multi-Motor System Based on Embedded Terminal

Research of measurement and control for bearing based on distributed system

Research on Control System of Redundancy BLDCM Based on Matlab

Design of the Multi-Motor Synchronous Control System Based on CAN Bus

Control System of Four-Redundancy Generators Based on CAN-Bus Communication Network

Design of the quad-redundant generators based on CAN-bus and nonlinear PID

The study for brushless dc motor networked servo control techniques

Design of the Distributed Control System Based on CAN Bus

Embeded BLDCM Network Control System

Control and communication of a multi-motor system based on LAN

Research of Control System of Sensorless Brushless DC Motor on the Base of ADuC812

Dual Redundancy Brushless DC Motor Control System Based on RS232

Design of the Embedded BLDCM Speed Regulating System Based on Network Control

An Effective Design of and Experimental Research on Dual-Redundancy BrushLess DC Motor (BLDCM)

The Method of Improving Communication Performance of Distributed Control System Based on CAN Bus

Communication Research on CAN Based Distributed Aero-Engine Control System