Abstract:The DC microgrid is connected to the AC utility by parallel bidirectional power converters (BPCs) to import/export large power, whose control directly affects the performance of the grid-connected DC microgrid. Much work has focused on the hierarchical control of the DC, AC, and hybrid microgrids, but little has considered the hierarchical control of multiple parallel BPCs that directly connect the DC microgrid to the AC utility. In this paper, we propose a hierarchical control for parallel BPCs of a grid-connected DC microgrid. To suppress the potential zero-sequence circulating current in the AC side among the parallel BPCs and realize feedback linearization of the voltage control, a d - q -0 control scheme instead of a conventional d - q control scheme is proposed in the inner current loop, and the square of the DC voltage is adopted in the inner voltage loop. DC side droop control is applied to realize DC current sharing among multiple BPCs at the primary control level, and this induces DC bus voltage deviation. The quantified relationship between the current sharing error and DC voltage deviation is derived, indicating that there is a trade-off between the DC voltage deviation and current sharing error. To eliminate the current sharing error and DC voltage deviation simultaneously, slope-adjusting and voltage-shifting approaches are adopted at the secondary control level. The proposed tertiary control realizes precise active and reactive power exchange through parallel BPCs for economical operation. The proposed hierarchical control is applied for parallel BPCs of a grid-connected DC microgrid and can operate coordinately with the control for controllable/uncontrollable distributional generation. The effectiveness of the proposed control method is verified by corresponding simulation tests based on Matlab/Simulink, and the performance of the hierarchical control is evaluated for practical applications.

Design of the quad-redundant generators based on CAN-bus and nonlinear PID

Control Strategy of Paralleled UPS System

Design of Speed Control System Based on Fuzzy-PID Hybrid Control for DC Motor

Decentralized DC Voltage and Power Sharing Control of the Parallel Grid Converters in Multi-Terminal DC Power Integration System

Hierarchical control for parallel bidirectional power converters of a grid-connected DC microgrid

An improved control strategy of single neuron PID

Decentralized Coordination Control for Parallel Bidirectional Power Converters in a Grid-Connected DC Microgrid

Decentralized Nonlinear Robust Adaptive Excitation Control Design for Power Systems

High Performance Control Strategy Based on Three-Phase Four-Wire Cascaded DSTATCOM

Distributed Coordination Control for Multiple Bidirectional Power Converters in a Hybrid AC/DC Microgrid

Robust Control for Generators Based on Dynamic COI-tracking Concept in Multi-Machine Power Systems

Nonlinear Coordinated Robust Governor Control of Hydro-turbine Generator Sets in Multi-machine Power Systems

Research on Parallel Power Generation Control of Double Vehicle-used Generator

Control of DPPS in Vehicle Using Feed-Forward Decoupling

An Independent Control Technique of the Doubly-fed Induction Generators System in Generalized Harmonic Power Grids

Tuning of Digital PID Controllers Using Particle Swarm Optimization Algorithm for a CAN-Based DC Motor Subject to Stochastic Delays

Design of Intelligent Nonlinear H2/H∞ Robust Control Strategy of Diesel Generator-Based CPSOGSA Optimization Algorithm

Design of Double Redundancy Controller for Electric Actuator Based on Dual three-phase PMSM

COORDINATED CONTROL OF STATCOM AND GENERATOR EXCITATION IN MULTI-MACHINE POWER SYSTEMS

Dynamic Coi-Tracking Concept for the Control of Generators in Multi-Machine Power Systems

Adaptive Fuzzy Neural Network PID Algorithm for BLDCM Speed Control System