Abstract:In recent years, combined sewer overflow (CSO) has been identified as a significant contributor to the deterioration of the urban water environment. It is thought that remolding it to a separate sewer system is a thorough and effective method of controlling the CSO in the appropriate area. However, according to current research, the separate stormwater sewer systems will also have overflow pollution due to functional defects, damaged or inappropriately connected with sewage, which has serious consequences for the separate system's operational efficiencies and the urban water environment. The event mean concentration, first flush effect, source apportionment, and correlation analysis of variables in overflow pollution generated in three residential catchments in Nanning, China, were investigated in this study. The results showed that the event mean concentration values in drainage outlets inappropriately connected with sewage were 2-4 times higher than those in stormwater outlets, especially for NH3-N, TN, and TP. Meanwhile, more than 80% of overflow events at outlets inappropriately connected with sewage had a weak first flush or even a weak dilution effect, with peak pollutant concentrations occurring 40-60 min after the overflow began. Besides, the discharge pollution load was primarily derived from the inside of the sewer. When the rainfall was heavy, the contribution rate of sewer sediment erosion exceeded 60%, which was much higher than the contribution rate of rainfall runoff and sewage. The variability in event mean COD and TSS concentrations was primarily attributed to the antecedent dry period and rainfall intensity. The COD concentration increased from 140.7 to 277.1 mg/L with the increase of antecedent dry period from 3 to 10 days. This study could help guide the implementation of targeted measures to treat overflow pollution in urban residential catchments, as well as the development of strategies to mitigate the effects on receiving water bodies.

Reduction of CSO Pollution Load Based on Controlling Sediment in Sewers

Field Performance of Self-Siphon Sediment Cleansing Set for Sediment Removal in Deep CSO Chamber.

Simultaneous Use of Nitrate and Calcium Peroxide to Control Sulfide and Greenhouse Gas Emission in Sewers

Experimental Study of the Performance of A Siphon Sediment Cleansing Set in A Cso Chamber

Combination of Nitrate and Sodium Nitroprusside Dosing for Sulfide Control with Low Carbon Source Loss in Sewer Biofilm Reactors

Flume Experimental Study of Erosion Characteristic of Sewer Sediment with Biological Activities

Effect on Simultaneous Removal of Ammonia, Nitrate, and Phosphorus Via Advanced Stacked Assembly Biological Filter for Rural Domestic Sewage Treatment

Total and Settling Velocity-Fractionated Pollution Potential of Sewer Sediments in Jiaxing, China

Analysis and Inspection on Siltation of Intercepting Combined Sewer System

Numerical Investigation on Bottom Shear Stress Induced by Flushing Gate for Sewer Cleaning.

Simultaneous Control of Sulfide and Methane in Sewers Achieved by a Physical Approach Targeting Dominant Active Zone in Sediments

In-situ Advanced Oxidation of Sediment Iron for Sulfide Control in Sewers

Water Quality-Based Double-Gates Control Strategy for Combined Sewer Overflows Pollution Control

Strategy of Rainwater Discharge in Combined Sewage Intercepting Manhole Based on Water Quality Control

Sulfide Elimination by Intermittent Nitrate Dosing in Sewer Sediments

Characterization and sources apportionment of overflow pollution in urban separate stormwater systems inappropriately connected with sewage

CSO Pollutants Reduction Effects of Two Different Stormwater Detention Tanks in Central Shanghai

Study on urban combined sewer overflows and self-purification capacity load of river

Reducing sulfide and methane production in gravity sewer sediments through urine separation, collection and intermittent dosing

Spatial Variations of Pollutants from Sewer Interception System Overflow.

Characteristics of Overflow Pollution from Combined Sewer Sediment: Formation, Contribution and Regulation