Abstract:Nitrate dosing is commonly used to control hydrogen sulfide production in sewer systems. However, quick rebound of the sulfide concentration after nitrate depletion has been observed and results in more serious odor and corrosion problem. To investigate the mechanism of sulfide regeneration in the nitrate-free period, a laboratory-scale sewer reactor was run for 30 days to simulate sulfide production and oxidation with intermittent nitrate addition. The results show that nitrate addition substantially reduced the sulfide concentration, but the produced elemental sulfur was then quickly reduced back to sulfide in nitrate-free periods. This induced more and more sulfide production in the sewer reactor. Elemental sulfur and polysulfide reductions were found in the sewage in nitrate-free periods, showing their contributions to the sulfide regeneration. Through batch tests, polysulfide was confirmed as the key intermediate for accelerating sulfur reduction during the nitrate-free period in the sewer. Sulfide production rates significantly increased by 65% and 59% in the presences of tetrasulfide and sulfur with sulfide, respectively, at the beginning of the test. While polysulfide formation was prevented by the ferrous chloride addition, the sulfur reduction rate remarkably decreased from 12.8 mgS/L-h to 1.8 mgS/L-h. This indicates that direct sulfur reduction was significantly slower than the indirect sulfur reduction via polysulfide; the latter process could be the cause for the quick rebound of the sulfide concentration in the sewer with intermittent nitrate dosing. Thus, the pathways of sulfur transformations in a sewer, both in the presence and absence of nitrate, were proposed. Microbial community analysis results reveal that some common sulfate-reducing bacteria (SRB) genera in sewer sediment were possible sulfur reducers. According to this finding, the effect and strategy of nitrate dosing for hydrogen sulfide control in sewers should be re-evaluated and re-considered.

Sulfide Elimination by Intermittent Nitrate Dosing in Sewer Sediments

Combination of Nitrate and Sodium Nitroprusside Dosing for Sulfide Control with Low Carbon Source Loss in Sewer Biofilm Reactors

Simultaneous Use of Nitrate and Calcium Peroxide to Control Sulfide and Greenhouse Gas Emission in Sewers

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

Effects of Intermittent Chemical Dosing on Volatile Sulfur Compounds in Sewer Headspace

In-situ Advanced Oxidation of Sediment Iron for Sulfide Control in Sewers

Effect of Dissolved Oxygen on N2O Release in the Sewer System During Controlling Hydrogen Sulfide by Nitrate Dosing.

Characteristics and Mechanism of Dimethyl Trisulfide Formation During Sulfide Control in Sewer by Adding Various Oxidants

Enhanced mechanistic insights and performance optimization: Controlling methane and sulfide in sewers using nitrate dosing strategies

Experimental and Modeling Investigations on the Unexpected Hydrogen Sulfide Rebound in a Sewer Receiving Nitrate Addition: Mechanism and Solution

Indirect Sulfur Reduction Via Polysulfide Contributes to Serious Odor Problem in a Sewer Receiving Nitrate Dosage.

A Biological Strategy for Sulfide Control in Sewers: Removing Sulfide by Sulfur-Oxidizing Bacteria.

Free Nitrous Acid-Based Suppression of Sulfide Production in Sewer Sediments: In-situ Effect Mechanism

Nitrite-dependent Microbial Utilization for Simultaneous Removal of Sulfide and Methane in Sewers

Enhancing Sulfide and Methane Control in Sewers: Unveiling the Impact and Mechanisms of Free Nitrous Acid Pre-Exposure Coupled with Calcium Peroxide Dosing

Evaluating the Oxidation Inhibition of Sulfide in Urban Sewers Using a Novel Quantitative Method.

In Situ Exploration of the Sulfidogenic Process at the Water-Sediment Interface in Sewers: Mechanism and Implications

Reducing sulfide and methane production in gravity sewer sediments through urine separation, collection and intermittent dosing

Simultaneous Control of Sulfide and Methane in Sewers Achieved by a Physical Approach Targeting Dominant Active Zone in Sediments

Improved Sulfide Mitigation in Sewers Through On-Line Control of Ferrous Salt Dosing.

Feasibility of Sulfide Control in Sewers by Reuse of Iron Rich Drinking Water Treatment Sludge.