Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Bi-Directional Dual-Wavelength Brillouin Lasing in A Hybrid Fiber Ring Cavity

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Single-frequency Brillouin lasing based on a birefringent fiber Fabry–Pérot cavity

An Injection-Locked Single-Longitudinal-Mode Fiber Ring Laser with Cylindrical Vector Beam Emission

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Dynamic mode-switchable and wavelength-tunable Brillouin random fiber laser by a high-order mode pump

More-than-95-line fiber laser based on hybrid gain from the Brillouin effect and erbium-doped fiber

Multiwavelength Brillouin-Erbium Fiber Laser with Quadruple-Brillouin-Frequency Spacing

Multiwavelength Brillouin/Erbium fiber laser with four-fold frequency shift spacing

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

Broadband Brillouin Slow Light Based on Multifrequency Phase Modulation in Optical Fibers

Widely Tunable Multi-Wavelength Fiber Laser Based on Cascaded Stimulated Brillouin Scattering in A Compact Linear Cavity

Multi-wavelength Brillouin-erbium Fiber Laser with More Than 95 Lines Based on a Dual-Ring Structure

Dual-Wavelength Bi-Doped Fiber Laser Based on Cascaded Cavities

Wavelength-interval Switchable Brillouin-Raman Random Fiber Laser through Brillouin pump manipulation

Tunable and narrow linewidth multi-wavelength Brillouin-erbium fiber laser using dual-wavelength pumping

Single-longitudinal-mode self-seeded Brillouin fiber laser with an ultra-narrow linewidth achieved utilizing a triple-ring resonator

Hybrid Brillouin/thulium Multiwavelength Fiber Laser with Switchable Single- and Double-Brillouin-frequency Spacing

Highly efficient dual-wavelength ytterbium-doped fiber linear cavity laser based on cascaded fiber Bragg gratings

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

Stabilizing Brillouin fiber laser for applications in distributed BOTDA sensing