Abstract:This paper deals with a case study for the piezoelectric materials suddenly exposed to an environmental medium of different temperature. The problem is idealized to a plate containing an edge crack or an embedded crack. The stress and electric displacement histories in an uncracked plate are calculated. These stresses and electric displacements are then added to the crack surface tractions and electric displacements with opposite sign to formulate a mixed boundary value problem. The cracking problem is thus reduced to a singular integral equation of Cauchy type, which is then solved numerically. Both impermeable crack assumption and permeable crack assumption are considered. The results for stress and electric displacement intensity factors are computed as a function of normalized time and crack size. Lower bound solutions are obtained for the maximum thermal shock that the material can sustain Without catastrophic failure according to the two distinct criteria: (i) The maximum local tensile stress equals the tensile strength of the medium. (ii) The maximum stress intensity factor for the pre-existing representative crack equals the fracture toughness of the medium. The parameters that control the transient thermal stress and electric displacement are also identified. The method can be used to explore susceptibility to thermal fracture in piezoelectric materials containing pre-cracks.

Transient response of a piezoelectric ceramic strip with an eccentric crack under electromechanical impacts

Transient response of an insulating crack between dissimilar piezoelectric layers under mechanical and electrical impacts

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

Transient Electromechanical Cracking of Finite Piezoelectric Bodies

Transient response of an interface crack between dissimilar piezoelectric layers under mechanical impacts

Transient Thermal Elastic Fracture of a Piezoelectric Cylinder Specimen

Coupled Electromechanical Fracture of Piezoelectric Ceramics Subjected to Transient Thermal Loads

A Cracked Piezoelectric Material Strip under Transient Thermal Loading

Electromechanical Impact of a Crack in a Functionally Graded Piezoelectric Medium

A crack in a piezoelectric layer bonded to a dissimilar elastic layer under transient load

Multiple Surface Cracks in a Piezoelectric Layer Bonded to an Elastic Substrate under Transient Electromechanical Loads

A Cracked Piezoelectric Material under Generalized Plane Electromechanical Impact

Impact interfacial fracture for piezoelectric ceramic

Multiple Surface Cracking of A Piezoelectric Layer Bonded to an Elastic Substrate under Dynamic Anti-Plane Electromechanical Impacts

Numerical Analysis for A Crack in Piezoelectric Material under Impact

Dynamic response for non-homogeneous piezoelectric medium with multiple cracks

Mixed mode crack initiation in piezoelectric ceramic strip

TIME-DEPENDENT PIEZOELECTRIC FRACTURE BEHAVIOR OF CONDUCTING CRACKS AND ELECTRODES

Thermal shock fracture of piezoelectric materials

FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD

A mixed electric boundary value problem for a two-dimensional piezoelectric crack