Abstract:This study systematically explores the dynamic response mechanisms and energy dissipation mechanisms of ultra-high-molecular-weight polyethylene (UHMWPE) fiber laminated plates with thicknesses of 1.1 mm, 2.8 mm, and 5.4 mm under high-speed steel ball impacts through experimental, theoretical analysis, and dimensional analysis. By analyzing the damage mechanisms from experimental results, the main modes of energy absorption were identified, and a relatively accurate predictive model for ballistic limit speed was established. The results show that under high-speed steel ball impacts, the primary failure modes of UHMWPE fiber laminated plates are localized permanent bulging plastic deformation and perforation failure caused by compressive shear. The ballistic limit speeds for UHMWPE with thicknesses of 1.1 mm, 2.8 mm, and 5.4 mm are respectively 233.5 m/s, 415.7 m/s, and 602.9 m/s. The theoretical calculations of the energy model align well with the experimental results, indicating that as the speed increases, the proportion of tensile energy absorption gradually decreases, consistent with the observed phenomena. Near the ballistic limit, there are significant turning points in the level of energy absorption and the height of the rear bulge. The ballistic limit increases linearly with target thickness, and the unit area density energy absorption also increases continuously. Finally, this study established a dimensionless ballistic limit model considering the mechanical properties of fibers and the matrix, which through regression analysis, can accurately describe the ballistic limits of various strengths and types of fiber laminated plates, suitable for predicting the ballistic performance of various composite materials.

Study on Absorbing Energy Character of Functionally Graded Plate of GFRP/CFRP

The dynamic behavior of functionally graded plates under the impact loading

Experimental investigation of the performances of thick CFRP, GFRP, and KFRP composite plates under ballistic impact

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Energy absorption characteristics of functionally graded polymer-based lattice structures filled aluminum tubes under transverse impact loading

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Energy Absorption Efficiency of Carbon Fiber Reinforced Polymer Laminates under High Velocity Impact

Ballistic Performance of Functionally Graded B4C/Al Composites Without Abrupt Interfaces: Experiments and Simulations

Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact

Ballistic performance of functionally graded B 4 C/Al composites without abrupt interfaces: Experiments and simulations

STUDY ON DAMAGE MECHANISM OF PLAIN WEAVE COMPOSITE UNDER HIGH VELOCITY IMPACT

Impact responses and residual flexural properties of narrow CFRP laminates

Dynamic Response Mechanisms of Thin UHMWPE under High-Speed Impact

Energy absorption characteristics of STF impregnated Kevlar fabric coating GFRP composite structure by projectile high-velocity impact

Ballistic performance and damage analysis of CFRP laminates under uniaxial pretension and precompression

Penetration mechanics of ceramic/metal functionally graded plates under ballistic impact: An experimental perspective

An Experimental Investigation into The High Velocity Penetration Resistance of CFRP and CFRP/Aluminium Laminates

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

EXPERIMENTAL STUDY OF BEHAVIOR OF PROTECTION ARMOR SUBJECTED TO FLYING PROJECTILE IMPACT

The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

Ballistic performance of ultra-high molecular weight polyethylene laminates against fragment-simulating projectiles