Abstract:The Multi-gap Resistive Plate Chamber (MRPC) is a new type of gas detector developed in recent years. It has excellent time resolution (better than 100 ps) and high efficiency (higher than 95%). This detector has been used to construct large-area time-of-flight (TOF) system in many nuclear and particle physics experiments. However, as a type of gaseous detector, the aging of the gas mixture under long-time exposure to ionizing radiation cannot be neglected. With the increase of accelerator luminosity, impurities in the gas mixture can be potentially dangerous for long-term operation of the MRPC. This has been observed in some experiments, for example with the RHICSTAR muon telescope detector. The CBM-TOF, used for hadron identification, is proposed to be assembled with MRPCs. These counters have to stand particle fluxes as high as 25 kHz/cm(2), and thus the gas pollution is a critical aspect to be studied. In order to better understand the gas quality's impact on the MRPC performance, a twodimensional simulation based on the SIMPLE algorithm is carried out to imitate the distribution of impurities in a MRPC gas box. The preliminary results show that gas pollution grows stronger with the increase of the gas-flowing volume. In addition, we conducted a series of experiments with a 50 x 50 cm(2), 8-gap MRPC prototype. The results match the simulation quite well. Gas pollution indeed has a severe impact on the MRPC performance, and further study can be very useful to reduce gas aging effects in high-luminosity experiments.

A Method to Estimate Gas Magnification of Multi-Gap Resistive Plate Chamber

Gas Magnification Of Multi-Gap Resistive Plate Chamber

Simulation Study of the Relation Between MRPC Performances and Working Gas

Research On Cosmic Ray Mass Test Method Of Mrpc

Study on the Physical Mechanism in Multi-Gap Resistive Plate Chamber

Methods for the Manufacture and Test of Multi-Gap Resistive Plate Chambers

Gas related effects on multi-gap RPC performance in high luminosity experiments

Performance Testing of a Long-Strip Two-End Readout Multi-Gap Resistive Plate Chamber

Study on the Performance of Multi-Gap Resistive Plate Chambers

Operation of a low resistivity glass MRPC at high rate using ecological gas

The High-Rate Sealed MRPC to Promote Pollutant Exchange in Gas Gaps: Status on the Development and Observations

Effect of Temperature on the Multi-Gap Resistive Plate Chamber Operation

Study on the coupled readout MRPC and eco working gas by a cosmic test system

Gap Uniformity Study of a Resistive Micromegas for the Multi-purpose Time Projection Chamber (MTPC) at Back-n White Neutron Source

Study on the Performance of Large Area Mrpc with High Position Resolution

Development of A Large-Area Multigap Rpc with Adequate Spatial Resolution for Muon Tomography

Development of Multi-Gap Resistive Plate Chambers with Low-Resistive Silicate Glass Electrodes for Operation at High Particle Fluxes and Large Transported Charges

Design and Test of a Gluing High Rate MRPC

Performance of Two Different Modules of Long-Strip Multi-Gap Resistive Plate Chamber

A Prototype of a High Rating MRPC

Beam Test Results of Two Kinds of High-Rate Multi-Gap Resistive Plate Chambers