Abstract:The CBM (Compressed Baryonic Matter) experiment constructed at FAIR (Facility for Anti-proton and Ion Research) at GSI, Darmstadt, Germany, will provide unique research opportunities to explore the phase diagram of nuclear matter. As one of the core detectors in the CBM experiment, the Time-of-Flight (TOF) system applies the MRPC (Multi-gap Resistive Plate Chamber) for a precise particle identification for all the incident charged hadrons. The CBM-TOF will be operated at an ion beam intensity up to 10(9)/s, which means the particle fluxes on the TOF wall can reach an unprecedentedly high rate of 30 kHz/cm(2). Almost half of the MRPC counters are from the inner region of the TOF wall, and they will be assembled with the low-resistive glass which enables them to work under such high rate. This is the first time of the large scale application of the low-resistive glass MRPCs into the nuclear and high-energy physics experiments. It is especially important to study on the production and test procedure to keep the good performance of all these counters. For this mass production, we have developed a set of specified manufacturing procedure and quality control method to guarantee the performance of all the counters. A newly developed method to check the uniformity of the gas gap with help of the projection imaging technique has been first applied. Until now, 73 MRPCs have been produced for the eTOF project in the BESII detector upgrade at STAR and the TOF system of mini-CBM. Tested by cosmic ray in a system based on TRB, all the produced counters show a stable performance of above 95% efficiency and below 90 ps time resolution. The study on the mass production of the low-resistive plate chamber will provide experience for wide application of MRPC into the high rate experiments in the future. In this paper, the counter design, manufacturing procedures, quality control methods and test results for this MRPC counter are described in a detailed way.

Methods for the Manufacture and Test of Multi-Gap Resistive Plate Chambers

Study on the Performance of Multi-Gap Resistive Plate Chambers

Production and quality control of STAR-TOF MRPC

Production of Long-Strip Multi-Gap Resistive Plate Chamber Module for the Star-Mtd System

CHINESE STAR-TOF MRPC PRODUCTION AND QA TESTING

R&D Mass Production of LMRPC Module for the STAR-MTD System

The Design for the Test System of Radiation Effect on Multi-Gap Plate Chamber

Performance Testing of a Long-Strip Two-End Readout Multi-Gap Resistive Plate Chamber

Performance of a New LMRPC Prototype for the STAR MTD System

Multigap Resistive Plate Chambers for Time of Flight Applications

Simulation Study of the Relation Between MRPC Performances and Working Gas

Aging Test of Multi-gap Resistive Plate Chambers

A MRPC Prototype for SOLID-TOF in JLab

Research On Cosmic Ray Mass Test Method Of Mrpc

Study on Cosmic Test and QC Method of High-Rate MRPC for CBM-TOF

Beam Test Results of Two Kinds of High-Rate Multi-Gap Resistive Plate Chambers

Study of High Time Resolution MRPC with the Waveform Digitizer System

Study on the Physical Mechanism in Multi-Gap Resistive Plate Chamber

Progress of R&D and Production of Timing RPCs in Tsinghua University

R&D of a Real-Size Mosaic MRPC Within the Framework of the CMS Muon Upgrade

A Prototype of a High Rating MRPC