Abstract:Copper-nickel alloys have received much attention in the last decades due to their high electrical, thermal, mechanical, and magnetic properties which mainly depend on their composition. In this paper, copper-nickel alloy coatings onto indium tin oxide substrate were elaborated by electrodeposition in pulsed current mode with optimized current density and deposition time. The electrodeposition is subsequently followed by thermal treatment under controlled atmosphere. The surface morphology and the chemical analysis of the elaborated coatings were assessed by scanning electron microscopy associated to x-ray microanalysis. Their structural analysis was performed by x-ray diffraction, and the Vickers microhardness test was conducted to examine their mechanical properties. Moreover, the adhesive strength of the copper-nickel coatings was evaluated using a progressive scratch test, while a multi-pass scratch test was employed to assess their wear resistance. The results showed that the copper-nickel coating obtained with optimized current density (− 20 mA/cm 2 ) and heat treated at 600 °C for 1 h under controlled atmosphere exhibits high mechanical properties; the microhardness increases from 133 to 280 HV, and the adhesion strength from 32 to 203 MPa. On the other hand, optimized electrodeposition conditions followed by thermal treatment led to thinner characteristic XRD pics of Cu-Ni coating indicating an increase in crystallinity from 12 nm to 44 nm. Mechanical characteristics underlined a high resistance to scratches, a decrease in the friction coefficient, and an increase in the dissipated energy which reaches 20 J for heat-treated Cu-Ni coating. These results highlighted a homogeneity in morphology, and low porosity improving the CuNi coatings adhesion strength to the substrate.

Thermal Effects on the Measurement of Photocurrent at Anodic Films on Nickel Electrodes

Essential Influence of Electrode and Electrolyte Temperatures on the Anodizing Process of Ti

Impact of Heat Treatment on the Structural, Optical, Magnetic and Photocatalytic Properties of Nickel Oxide Nanoparticles

Effects of Hydrothermal Modification on the Electrochemical Properties of Nano-scale Nickel Hydroxide

Temperature Dependence on Current-Voltage Characteristics of Ni∕Au–Al0.45Ga0.55N Schottky Photodiode

Effect of Underetching on Thermal Conductivity Measurement of Suspended Nanofilm

Preliminary Investigation of Thermoelectric Electromotive Force Oscillation of NiCr/NiSi Thin Film Thermocouple in Dynamic Calibration

Photophysical Study on the Effect of the External Potential on NiO-Based Photocathodes

Influence of substrate temperature on electrical and optical properties of p-type semitransparent conductive nickel oxide thin films deposited by radio frequency sputtering

Probing the Nickel Corrosion Phenomena in Alkaline Electrolyte Using Tender X-Ray Ambient Pressure X-Ray Photoelectron Spectroscopy

Epma and Xrd Study on Nickel Metal Thin Film for Temperature Sensor

Study of the effects of nanometer ?-Ni(OH) in nickel hydroxide electrodes

Quantification and description of photothermal heating effects in plasmon-assisted electrochemistry

FILM THICKNESS INFLUENCES ON THE THERMOELECTRIC PROPERTIES OF NiCr/NiSi THIN FILM THERMOCOUPLES

Analyzing the Temperature Dependence of Titania Photocatalysis: Kinetic Competition between Water Oxidation Catalysis and Back Electron-Hole Recombination

Corrosion Behavior and Mechanism of Nickel as a Hydrogen Evolution Electrode Under High Alkalinity and Temperature

Oxidation Behaviour of NiSi-NiCr Thin Film Thermocouples and Antioxidation Effect of SiNxOy Film

Electron-Beam Induced Water Removal, Phase Change, and Crystallization of Anodic-Electrodeposited Turbostratic Nickel Hydroxide-Oxyhydroxide

Measurement of the Thermal Conductivity of Nanodeposited Material

Influence of Annealing Temperature on Photoelectrochemical Performance of Nb-doped SrTiO3 Film

Heat Treatment Effects on the Microstructural and Mechanical Properties of Electrodeposited Cu-Ni Coatings