Abstract:Gel electrolytes and solid electrolytes have been reported as a potential element to slow down the polysulfide shuttle by reducing its mobility in the electrolytes. The preparation of sulfur-conductive polymer composites, or sulfur-carbon composites, has been reported as softening the impact of the shuttle effects. Unlike Li-ion batteries so far, no electrolyte is found to be optimal for Li–S batteries at all conditions. Taking into account all these factors, in the present study, an attempt has been made to develop solid polymer electrolytes in conjunction with non-aqueous liquid electrolytes along with inert fillers for Li–S batteries. Poly-ethylene oxide (PEO)-based composite gel polymer electrolytes (CGPE) comprising a combination of plasticizers, namely 1,3-dioxolane (DIOX)/tetraethylene glycol dimethylether (TEGDME) and a lithium salt (LiTf) with the addition of ceramic filler, barium titanate (BaTiO3) have been prepared using a simple solution casting technique in an argon atmosphere. The as-prepared polymer electrolyte films were subjected to SEM, ionic conductivity, TG/DTA, and FTIR analyses. A symmetric cell composed of Li/CGPE/Li was assembled, and the variation of interfacial resistance as a function of time was also measured. The ionic conductivity was found to be increased as a function of temperature. The lithium transference number (Lit+) was measured, and the value was calculated as 0.7 which is sufficient for battery applications. The electrochemical stability window of the sample was studied by linear sweep voltammetry, and the polymer electrolyte film was found to be stable up to 5.7 V. The TG/DTA analysis reveals that this CGPE is thermally stable up to 350 °C. The compatibility studies exhibited that CGPE has better interracial properties with lithium metal anode. The interaction between the PEO and salt has been identified by an FTIR analysis.

Proton-conducting gel polyelectrolytes based on Lewis acid

Lithium ion conducting gels containing porous PVDF-HFP matrix filled with crosslinked PEG

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation and proton conductivity of poly(vinylidene fluoride)/layered double hydroxide nanocomposite gel electrolytes

Preparation and characterization of a semi-interpenetrating network gel polymer electrolyte

Novel Amphiphilic Polymer Gel Electrolytes Based on (Peg-B-gma)-co-mma

Synthesis of Proton Conductive Copolymers of Inorganic Polyacid Cluster Polyelectrolytes and PEO Bottlebrush Polymers

A Room-Temperature Ionic-Liquid-Templated Proton-Conducting Gelatinous Electrolyte

Preparation and Characterization of Novel Crosslinked Poly[glycidyl Methacrylate–poly(ethylene Glycol) Methyl Ether Methacrylate] As Gel Polymer Electrolytes

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Mechanically and Thermally Robust Gel Electrolytes Built from A Charged Double Helical Polymer

Lithium Polymer Gel Electrolytes Designed to Control Ionic Mobility

A Polyoxometalate Gel Electrolyte with Enhanced Electrochemical Performance

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

Preparation and Characterization of Poly(vinyl Chloride‐co‐vinyl Acetate)‐based Gel Electrolytes for Li‐Ion Batteries

Development study of proton conductor: poly(vinyl alcohol)-based gel electrolyte for energy storage devices

A Preeminent Gel Blending Polymer Electrolyte of Poly(vinylidene Fluoride-Hexafluoropropylene) -Poly(propylene Carbonate) for Solid-State Lithium Ion Batteries

Electrochemical performance of plasticized PEO-LiTf complex-based composite gel polymer electrolytes with the addition of barium titanate

Gel polymer electrolyte based on PVDF-HFP:PMMA incorporated with propylene carbonate (PC) and diethyl carbonate (DEC) plasticizers : electrical, morphology, structural and electrochemical properties

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

A novel polymer electrolyte based on PMAML/PVDF-HFP blend