Abstract:This paper deals with the estimation of maximum displacements in single-degree-of-freedom (SDOF) systems simulating typical steel structures by means of dimensional analysis. Peak deformation demands in bilinear systems (representative of moment resisting frames) are considered as well as additional pinching models depicting Partially-Restrained (PR) and Concentrically-Braced (CB) frames subjected to a series of non-coherent acceleration records. Particular attention is given to the identification of efficient length and time scales in non-pulselike earthquake motions. The relative merits of incorporating the mean period of the ground-motion (Tm), predominant period (Tp), significant duration (tsig) as well as peak ground acceleration (PGA), peak ground velocity (PGV), root mean square acceleration (aRMS), root mean square velocity (vRMS) and Arias Intensity (Ia) within the dimensionless functional form are evaluated. When the normalized peak displacements of bilinear, PR and CB oscillators are presented as a function of the normalized yield displacement and dimensionless characteristic structural strengths (both total and at pinching intervals), a clear pattern emerges and the response becomes self-similar. This paper demonstrates that the use of the mean period (Tm) as a time scale produces consistently lower dispersion and bias in the estimations of maximum displacements in comparisons with other ground-motion time scales. Similarly, the root mean square acceleration (aRMS) is found to be the most efficient amplitude-related parameter for the estimation of maximum displacements in bilinear and CB structures whereas the peak ground acceleration (PGA) is the most efficient ground-motion parameter for the prediction of peak deformations in PR systems. Finally, simple expressions for the assessment of displacement demands in steel structures based on the most-efficient dimensionless master curves are proposed and verified.

Maximum displacement profiles for the performance based seismic design of plane steel moment resisting frames

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Seismic response of non-structural components in multi-storey steel frames

Optimization & Design of High Rise Building with Different Structural Framing Systems Subjected To Seismic Loads

Displacement Control of Existing Steel Moment-Resisting Frame Structures Using Buckling-Restrained Braces

Direct Displacement-Based Seismic Performance Design Without Iteration for Steel Frame Structures

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Direct Displacement-Based Seismic Performance Design of Steel Frame Structures

Enhancing Seismic Performance of Multi-story Steel Buildings Using Inner Mega Braced Frames

Estimation of peak displacements in steel structures through dimensional analysis and the efficiency of alternative ground-motion time and length scales

Experimental Study on Seismic Behavior of High Strength Steel Frames: Local Response

Study of Displacement-Based Seismic Design for RC Frame Structures

INELASTIC DISPLACEMENT RATIO SPECTRA FOR REINFORCED CONCRETE REGULAR FRAME STRUCTURES

Probabilistic seismic demand models for steel frame structures subjected to pulse-like ground motions

Performance-based Seismic Design of Multistory Frame Structures Equipped with Crescent-Shaped Brace

A Performance-Based Design Approach for Rectangular Concrete-Filled Steel Tube (RCFT) Frames under Seismic Loading

Mass irregularity effect on seismic response of moment‐resisting steel frame by nonlinear time history analysis using force analogy method

A Novel Procedure for the Assessment of the Seismic Performance of Frame Structures by Means of Limit Analysis

A two-level performance-based plastic design method for multi-story steel frames with double-yielding systems

RESEARCH ON DISPLACEMENT-BASED SEISMIC DESIGN METHOD OF STEELREINFORCED CONCRETE FRAME WITH SPECIALLY-SHAPED COLUMNS