Abstract:Analysing the quality of weld seams is still a challenging task. An optical inspection of the surface is giving limited information about the shape and depth of the weld seam. An application for laser beam welding with high demands regarding the weld depth consistency is the electrical contacting of battery cells. The batteries themselves have a limited terminal or case thickness that must not be penetrated during the welding process to avoid leakage or damage to the cell. That leads to a minimum weld depth to ensure the electrical functionality, and a maximum weld depth indicated by the case thickness. In such applications, a destructive analysis is not suitable which leads to the demand for a non-destructive measurement during the process. Using a coaxial, interferometric measurement setup, the keyhole depth during the deep penetration welding is measureable. For a keyhole with a depth of a couple of millimetres, such a system is commercially available. In micro scale, however, these systems are facing several challenges such as scanning systems, small spot diameters of a few tens of micrometres and narrow keyholes. This study contains an investigation of an interferometric measurement of the keyhole depth and the suitability for laser micro welding. Therefore, the data processing of the achieved measurements is investigated, and the results are compared with the depth measurement of metallographic analysed samples. Stainless steel is used to investigate the behaviour and the stability of developed data processing strategy and the resulting depth values.

Research status on keyhole of electron beam deep penetration welding

Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

Numerical Investigation on Molten Pool Dynamics and Defect Formation in Electron Beam Welding of Aluminum Alloy

Fundamental understanding of open keyhole effect in plasma arc welding

Simulation of the Effect of Keyhole Instability on Porosity during the Deep Penetration Laser Welding Process

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Study on keyhole characteristics and weld pool dynamics of Ti6Al4V alloy fabricated by continuous wave laser beam welding

Numerical and experimental study of thermal fluid flow and keyhole dynamic in laser welding of aluminum alloy assisted by electromagnetic field

Keyhole Thermal Behavior in GTAW Welding Process

Closed-Loop Control of Weld Penetration in Keyhole Plasma Arc Welding

Enhanced Penetration Depth during Reduced Pressure Keyhole-Mode Laser Welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding

Keyhole Welding with Hybrid Plasma-Free Arc Source

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection