Abstract:In this study, xCuO-CeO2 mixed oxide catalysts (Cu weight ratio x = 1.5, 3, 4.5, 6 and 15 wt.%) were prepared using solution combustion synthesis (SCS) and their catalytic activities towards the methane (CH4) oxidation reaction were studied. The combustion synthesis of the pure CeO2 and the CuO-CeO2 solid solution catalysts was performed using copper and/or cerium nitrate salt as an oxidizer and citric acid as a fuel. A variety of standard techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to reveal the microstructural, crystal, thermal and electronic properties that may affect the performance of CH4 oxidation. The CuO subphase was detected in the prepared solid solution and confirmed with XRD and Raman spectroscopy, as indicated by the XRD peaks at diffraction angles of 35.3° and 38.5° and the Ag Raman mode at 289 cm−1, which are characteristics of tenorite CuO. A profound influence of Cu content was evident, not only affecting the structural and electronic properties of the catalysts, but also the performance of catalysts in the CH4 oxidation. The presence of Cu in the CeO2 lattice obviously promoted its catalytic activity for CH4 catalytic oxidation. Among the prepared catalysts, the 6% CuO-CeO2 catalyst demonstrated the highest performance, with T50 = 502 °C and T80 = 556 °C, an activity that is associated with the availability of a fine porous structure and the enhanced surface area of this catalyst. The results demonstrate that nanocrystalline copper-ceria mixed oxide catalysts could serve as an inexpensive and active material for CH4 combustion.

Catalytic Methane Combustion over Co3O4/CeO2 Composite Oxides Prepared by Modified Citrate Sol–Gel Method

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Effect of CeO2 Preparation Method and Cu Loading on CuO/CeO2 Catalysts for Methane Combustion

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Ni–Ce–Al composite oxide catalysts synthesized by solution combustion method: Enhanced catalytic activity for CO methanation

Enhanced Activity of CuCeO Catalysts for CO Oxidation: Influence of Cu2O and the Dispersion of Cu2O, CuO, and CeO2.

Synthesis of Mesoporous CeO2-MnOx Binary Oxides and Their Catalytic Performances for CO Oxidation

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Catalytic Oxidation of Methane over Novel Ce?Ni?O Mixed Oxide Catalysts Prepared by Oxalate Gel-Coprecipitation

Effect of Additives on the Structure Characteristics, Thermal Stability, Reducibility and Catalytic Activity of CeO 2 –zro 2 Solid Solution for Methane Combustion

Preparation of Ni-Ce-O Mixed Oxide by Oxalate Gel-Coprecipitation Method for Catalytic Combustion of Methane

A comparison of NiO–CuO–CeO2 composite catalysts prepared via different methods for CO oxidation

Promotional Effect of CeO2 and Y2O3 on CuO/ZrO2 Catalysts for Methane Combustion

Increasing Cerium Dispersion Favours Lattice Oxygen Activity of Cobalt Oxides for CO Catalytic Combustion

Hollow Multishelled Structure of Heterogeneous Co3O4–CeO2−x Nanocomposite for CO Catalytic Oxidation

Efficient CO Oxidation using Co3O4−CeO2 Nanoparticles Supported on Resin–Based Spherical Activated Carbon with Controllable Oxygen Species

Catalytic Properties of Ni-Ce-O/ZrO_2 in Low-Temperature Methane Combustion

Effect of Water Vapor on the CO and CH4 Catalytic Oxidation over CeO2-MOx (m=cu, Mn, Fe, Co, and Ni) Mixed Oxide

Effect of Ca Doping on the Catalytic Performance of CuO–CeO2 Catalysts for Methane Combustion

Enhanced activity and stability of La-doped CeO2 monolithic catalysts for lean-oxygen methane combustion