Abstract:This paper presents a transistor open-circuit fault diagnosis method based on an average model and post-fault reconfiguration algorithms for a grid-tied single-phase inverter that transfers power bi-directionally. The transistor open-circuit fault occurrence is detected by comparing the average bridge arm pole-to-pole voltage deviation and threshold first. Then, the exact faulty transistor is identified by developed algorithms based on post-fault reconfiguration of control (PFRC) and of utilizing redundant leg (PFRUR). These two fault identification algorithms are suitable for different situations. Compared with the PFRUR, the PFRC can identify the faulty transistor without the help of redundant leg, but the identification time is longer. For inverters equipped with redundant leg already, the PFRUR can achieve faster identification speed so that inverters in reliability-oriented applications can return to normal operation after fault with short interruption. With average model, this method only requires existing signals sampled for control, thus it can be embedded in system easily without adding extra sensors and diagnosis circuits. The sampling frequency can be as low as switching frequency. Furthermore, this method is suitable for both inverters with L or LCL filters. Finally, experiments are carried out on a 550-W/10-kHz grid-tied single-phase inverter to verify the effectiveness.

Inverter Faults Diagnosis in PMSM DTC Drive Using Reconstructive Phase Space and Fuzzy Clustering

Detection of Inter-Turn Short Circuit Fault for Dual Three-Phase PMSM Based on Vector Space Decomposition Scheme

Diagnosis of inverter faults in PMSM DTC drive using time-series data mining technique

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Neural-fuzzy technique for inverter faults diagnosis in PMSM DTC system

Fault Tolerant Inverter Based Direct Torque Control for Permanent Magnet Synchronous Motor

Detection of Stator Winding Faults in PMSMs Based on Second Harmonics of Phase Instantaneous Reactive Powers

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Research on Fault Tolerant Inverter Based Permanent Magnet Synchronous Motor Direct Torque Control Drives

Current Residual Vector-Based Open-Switch Fault Diagnosis of Inverters in PMSM Drive Systems

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Study on Inverter Fault-Tolerant Operation of PMSM DTC

PWM-VSI Fault Diagnosis for a PMSM Drive Based on the Fuzzy Logic Approach

Diagnosis and Tolerance of Common Electrical Faults in T-Type Three-Level Inverters Fed Dual Three-Phase PMSM Drives

A modified Direct Torque Control for PMSM under inverter fault

Predictive DTC Strategy With Fault-Tolerant Function for Six-Phase and Three-Phase PMSM Series-Connected Drive System

Open Circuit Fault Diagnosis of Five Phase Permanent Magnet Synchronous Motor Drive System Based on Hybrid Logic Dynamic Model

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

Four-Switch Inverter Fed PMSM DTC with SVM approach for Fault Tolerant operation