Abstract:A new method for the determination of inorganic Sb species by on-line cloud point extraction combined with electrothermal vaporization inductively coupled plasma atomic emission spectrometry (ETV-ICP-AES) is presented and evaluated. The method is based on the complexation of Sb(III) with pyrrolidine dithiocarbamate (PDC) which form an hydrophobic complex at pH 5.5 and subsequently enter surfactant-rich phase at pH 5.5, whereas Sb(V) remained in aqueous solutions. The preconcentration step is mediated by micelles of the non-ionic surfactant Triton X-114 with ammonium pyrrolidine dithiocarbamate (APDC). The micellar system containing the complex was loaded into the FIA manifold at a flow rate of 2.5 mL min(-1), and the surfactant-rich phase was retained in a microcolumn packed with absorbent cotton, at pH 5.5. After the surfactant-rich phase was eluted with 100 microL acetonitrile, it was determined by ETV-ICP-AES. Sb(V) is reduced to Sb(III) by l-cysteine prior to determined total Sb, and its assay is based on subtracting Sb(III) from total antimony. The main factors affecting separation/preconcentration and the vaporization behavior of analyte in graphite tube were investigated in detail. Under the optimized conditions, the precision relative standard deviation (R.S.D.) for eight replicate measurements of 0.2 microg mL(-1) Sb(III) was 4.3%. The apparent concentration factor, which is defined as the concentration ratio of the analyte in the final diluted surfactant-rich extract ready for ETV-ICP-AES detection and in the initial solution, was 872 for Sb(III). The limit of detection (LOD) for Sb(III) was 0.09 microg L(-1). The proposed method was successfully applied for the speciation of inorganic antimony in different water samples and urine sample with satisfactory results.

Study on the Determination of Antimony by HG-ICP-AES Associated with a Flow Injection Activated Carbon Microcolumn Adsorption and Separation System

Determination of antimony in water samples by hydride generation coupled with atmospheric pressure glow discharge atomic emission spectrometry

On-line Cloud Point Extraction Combined with Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry for the Speciation of Inorganic Antimony in Environmental and Biological Samples.

HG-ICP-AES DETERMINATION OF ANTIMONY(Ⅲ,V) IN NATURAL WATER

Determination of antimony(III) and antimony(V) in natural waters at ultratrace levels by flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry

Determination of Antimony by Bianode Electrochemical Hydride Generation-Atomic Fluorescence Spectrometry

Determination of antimony in environment samples by gas phase chemiluminescence detection following flow injection hydride generation and cryotrapping.

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges.

Determination of Arsenic, Antimony, Bismuth, Selenium and Tin in Biological and Environmental Samples by Continuous Flow Hydride Generation ICP-AES Without Gas-Liquid Separator

Determination of trace amount of antimony (III) by adsorption voltammetry on carbon paste electrode

Determination of Trace Antimony (iii) by Adsorption Voltammetry at Carbon Paste Electrode

Ultra-sensitive determination of antimony valence by solution cathode glow discharge optical emission spectrometry coupled with hydride generation

Speciation of antimony(III) and antimony(V) using hydride generation inductively coupled plasma atomic emission spectrometry combined with the rate of pre-reduction of antimony

Determination of Trace Antimony (III) in Water Samples with Single Drop Microextraction Using BPHA-[C4mim][PF6] System Followed by Graphite Furnace Atomic Absorption Spectrometry.

Total antimony analysis by hydride generation-microwave plasma-atomic emission spectroscopy with applications

Determination of Trace Antimony (III) in Water Samples with Single Drop Microextraction Using BPHA-[C<sub>4</sub>mim][PF<sub>6</sub>] System Followed by Graphite Furnace Atomic Absorption Spectrometry

Highly Sensitive Determination of Trace Antimony in Water Samples by Cobalt Ion Enhanced Photochemical Vapor Generation Coupled with Atomic Fluorescence Spectrometry or ICP-MS

Determination of antimony in ores and related materials by continuous hydride-generation atomic-absorption spectrometry after separation by xanthate extraction

Antimony Speciation Analysis in Angelica by Ion Chromatography-Bianode Electrochemical Hydride Generation-Atomic Fluorescence Spectrometric Detection

Determination of Trace Antimony by Square-Wave Adsorptive Cathodic Stripping Voltammetry at an Ex Situ Prepared Bismuth Film Electrode

A New Method For Antimony Speciation In Plant Biomass And Nutrient Media Using Anion Exchange Cartridge