Abstract:The fabrication of superhydrophobic coatings on mild steel has attracted considerable attention. However, some methods are cumbersome and unsuitable for large-scale preparation, limiting industrial applications. Furthermore, the extensive use of fluorinated compounds to achieve low surface energy is not environmentally friendly. This paper proposed a facile method based on electrodeposition and annealing to prepare mild steel-based superhydrophobic surfaces without chemical modifications. Subsequently, SEM images were analyzed, and it was observed that the plating parameter (current and time) significantly affected surface morphology. At optimum process parameters, a rough surface with a multi-level structure was formed on the plated surface, contributing to superhydrophobic properties. XPS, EDS, and XRD were utilized to analyze surface composition. The results indicated the presence of copper oxides, zinc oxides, and a large number of hydrocarbons on the prepared superhydrophobic surface. These transition metal oxides on the surface adsorbed hydrocarbons in the air during the annealing process, which lowered the surface energy. Combined with the obtained multi-level morphology, a superhydrophobic surface was achieved. Finally, the corrosion behavior was evaluated in 3.5 wt% NaCl solution by AC impedance spectroscopy. Results showed that the obtained superhydrophobic surface, compared with the untreated coating and the steel substrate, showed a substantial improvement in corrosion resistance. A mild steel-based superhydrophobic surface with a contact angle greater than 150 degrees and excellent corrosion resistance was finally obtained. We hope this study will facilitate the industrial preparation of superhydrophobic coatings, especially in marine engineering, since this method does not require complex processes or expensive equipment and does not require fluorinated substances.

A Novel Method to Fabricate Water-Soluble Hydrophobic Agent and Super-Hydrophobic Film on Pretreated Metals

A smart electroplating approach to fabricate mechanically robust and fluorine-free Ni-W alloys based superhydrophobic coating on Al alloy

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Facile fabrication of high‐white and robust superhydrophobic Ni/Al2O3 composite coating on Al alloy

Facile and Eco-Friendly Preparation of Mild Steel Based Superhydrophobic Surfaces without Chemical Modifications

Fabrication of Superhydrophobic Surface with Different Metal Films on Aluminum Alloy

Fluorine-free, corrosion-resistant aluminum surfaces with nickel hydroxide and stearic acid superhydrophobic coatings

Hydrogen bubble-templated electrodeposition of modifier-free superhydrophobic Zn-Ni films

Facile Preparation of Superamphiphobic Phosphate–cu Coating on Iron Substrate with Mechanical Stability, Anti-Frosting Properties, and Corrosion Resistance

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition

Fast and Low-Cost Method to Fabricate Large-Area Superhydrophobic Surface on Steel Substrate with Anticorrosion and Anti-Icing Properties

Fabrication of Stable Superhydrophobic Surface with Low Adhesion on Aluminum Foil

A green one-step fabrication of superhydrophobic metallic surfaces of aluminum and zinc

Superhydrophobic LDH/TTOS composite surface based on microstructure for the anti-corrosion, anti-fouling and oil-water separation application

Hybrid superamphiphobic anti-corrosion coating with integrated functionalities of liquid repellency, self-cleaning, and anti-icing

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Facile Fabrication of Iron-Based Superhydrophobic Surfaces Via Electric Corrosion Without Bath

Spray-coated Superhydrophobic Surfaces with Wear-Resistance, Drag-Reduction and Anti-Corrosion Properties

Superhydrophobic and Superoleophobic Surface by Electrodeposition on Magnesium Alloy Substrate: Wettability and Corrosion Inhibition

Fabrication of Repairable Superhydrophobic Surface and Improved Anticorrosion Performance Based on Zinc-Rich Coating

Super-hydrophobic film fabricated on Copper with electro-deposition method and its corrosion resistance