Abstract:Bioethanol and dimetyl carbonate (DMC) are considered alternative fuels and additives to the synthesis compounds used now, since bioethanol is a biofuel and dimethyl carbonate (DMC) is non-toxic, biodegradable and can be produced in a cleaner way. In this study, the effect of adding dimethyl carbonate (DMC) and ethanol to gasoline on the volatility was investigated. The volatility was the main goal of this research but also, the effect on the antiknock properties was studied. Mixtures of gasoline with DMC or with bioethanol were prepared in different proportions of additive: 3%, 6% and 9% v/v. Additionally, mixtures with 3% v/v ethanol plus 3% or 6% v/v DMC, and3% DMC plus 6% v/v ethanol were prepared. For the volatility evaluation, the ASTM distillation curve and vapor pressure of these mixtures were determined experimentally in order to predict the performance of the resulting fuels. When adding oxygenated compounds, the increase in vapor pressure was proportional to the additive quantity. Additionally, modifications of the ASTM distillation curves were observed, with these indicating the formation of minimum boiling point azeotropes and the corresponding increase in volatility, with good effect on the ease of ignition in the engine. Based on the experimental results, the vapor lock index VLI, drivability index DI and vapor–liquid ratio temperature T(V/L=20) were calculated to quantify the volatility. The experimental results showed that gasoline mixtures with these oxygenated compounds show a significant increase in antiknock properties. Thus, for mixtures with ethanol, the research octane number (RON) increases by up to 2.2 units and the motor octane number (MON) increases by up to 1.2 units. Gasoline mixtures with DMC have another behavior: RON increased by up to 1.5 units, while the MON value increased by up to 2.5 units. For an initial gasoline with RON = 94.7 and MON 84.7, these increases are important and make the difference by exceeding the RON = 95 limit. Adding dimethyl carbonate to gasoline–ethanol blends improves the sensitivity of the fuel.

Effects of Methanol and Base Gasoline on Mixture Evaporation Characteristic

Numerical analysis of the effect of swirl angle and fuel equivalence ratio on the methanol combustion characteristics in a swirl burner

Experimental and Numerical Study on the Effect of Hydrogen Addition on Laminar Burning Velocity of Ethanol-Air Mixtures

The influence of exhaust gas recirculation coupling with fuel injection pressure on the combustion and emission characteristics of engine fueled with methanol-gasoline blends

Study on Combustion Characteristics of a DI Diesel Engine Operating on Diesel/Methanol Blends

Effects of Methanol Application on Carbon Emissions and Pollutant Emissions Using a Passenger Vehicle

Metnanol Gasoline ' S Anti-Separate Property

Properties of gasoline-ethanol-methanol ternary fuel blend compared with ethanol-gasoline and methanol-gasoline fuel blends

Unregulated Emissions and Combustion Characteristics of Low-Content Methanol−Gasoline Blended Fuels

Experimental Study on the Burning Rates of Ethanol-Gasoline Blends Pool Fires under Low Ambient Pressure

Volatility of Blended Fuel of Endothermic Hydrocarbon Fuel and Triethylamine

Experimental Investigation on the Physical Properties and the High-Pressure Spray Characteristics of Lubricityimproved Methanol and Prediction of Spray Tip Penetration by Empirical Models

Spray and Explosion Characteristics of Methanol and Methanol-Benzene Blends Near Azeotrope Formation: Effects of Temperature, Concentration, and Benzene Content

Impact of Adding Bioethanol and Dimethyl Carbonate on Gasoline Properties

Investigation of Bubble-Point Vapor Pressures for Mixtures of an Endothermic Hydrocarbon Fuel with Ethanol

Evaporation and combustion characteristics for a droplet of lubricating oil and gasoline

Densities, viscosities and refractive indices of binary liquid mixtures of methyl tert-butyl ether or ethyl tert-butyl ether with a hydrocarbon fuel

Influence of methanol gasoline blend fuel on engine and catalyst performance

Preferential Droplet Vaporization of a 24-Component Mixture under Different Ambient Temperature, Pressure and Force Convection

Experimental and Simulation Analysis on Spray Characteristics of Hydrous Ethanol-Gasoline Blends