Abstract:In this experimental study, involving deuterium–deuterium fusion neutron emission spectroscopy measurement on the experimental advanced superconducting tokamak (EAST), a liquid scintillator detector (BC501A) was employed. This decision was based on the detector's superior sensitivity, optimal time-response, and its exceptional n–γ discrimination capability. This detector emits fast pulse signals that are as narrow as 100 ns, with high count rates that can peak at several Mcps. However, conventional nuclear circuits faced challenges in performing pulse height analysis, n–γ pulse shape discrimination, and in recording the entire pulse waveform under such high count rate conditions. To address these challenges, a high-speed digital pulse signal acquisition and processing system was designed. The system was developed around a micro-telecommunications computing architecture. Within this structure, a signal acquisition and processing (SAQP) module communicated through PCI Express links, achieving a bandwidth of up to 1.6 GB/s. To accurately capture the detailed shape of the pulses, four channels of analog-to-digital converters were used, each with a 500-MSPS sampling rate and a 14-bit resolution, ensuring an accuracy that surpassed 11 bits. An n–γ discrimination algorithm, based on the two-gate integral method, was also developed. Implemented within field programmable gate arrays, this algorithm provided a real-time n–γ discrimination spectrum for pulse height analysis. The system underwent rigorous testing in a laboratory setting and during an EAST experiment. The results confirmed that the innovative SAQP system can satisfy the demanding requirements of high-parameter experiments, manage count rates of up to 2 Mcps, execute real-time n–γ discrimination algorithms, and record entire pulse waveforms without any data loss.

PCI/iRMX-based front-end data acquisition for the HT-7U experiment

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

High Resolution X-Ray Medical Sequential Image Acquisition and Processing System Based on PCI Interface

Performance evaluation of the HT-7U data system

Design of rf front end for cavity beam position monitor based on ics *

Data Acquisition System for CEPC Vertex Detector Prototype

Development of a real-time magnetic island reconstruction system based on PCIe platform for HL-2A tokamak

Data acquisition system for a newly-built hard x-ray/soft gamma-ray spectrometer imaging system on experimental advanced superconducting tokamak

Preliminary Design of a General Electronics Platform for Accelerator Facilities

Design and implementation of a ground detection system for HERD-TRD front-end electronics

Front-end Electronics and Data Acquisition System for Imaging Atmospheric Cherenkov Telescopes

A Multi-Parameter Data Acquisition System for the Collision Research Platform at Shanghai Ebit

Prototype of a multi-host type DAQ front-end system for RI-beam experiments

Data management system of RMS700 monitoring and protecting system

Multi-Channel Data Acquisition Card under New Acquisition and Transmission Architecture of High Frequency Ground Wave Radar

FPGA-based real-time 105-channel data acquisition platform for imaging system

A PXI-based Multi-channel Data Acquisition System for Fast Transient Pulses

Data Acquisition and Control System for the Ece Imaging Diagnostic on the East Tokamak

Development of a high-speed digital pulse signal acquisition and processing system based on MTCA for liquid scintillator neutron detector on EAST

A PXI-based, Multi-channel Ultra-fast Data Acquisition System for Transient Pulsed Signals

Design of PCI-based data acquisition, antenna control, and real-time web-based database for a solar radio observational system