Abstract:When using well-designed multiple-stage heavy-drawn processes, i.e., cold rolling, drawing and cluster drawing to fabricate a metallic wire or fiber in steps, cold rolling and annealing are critical steps due to their effect on the initial microstructure before the heavy-drawn process. Understanding the relationship between microstructure evolution and cold rolling followed by annealing is required for smoothly implementing the heavy-drawn process. In this work, the evolution behavior in terms of the microstructure during cold rolling followed by annealing was investigated in a novel C-2000 alloy that is a promising candidate material for the fabrication of high-performance metallicwire. The investigation encompassed parameters including the grain size, grain boundaries, recrystallization texture, and short-range ordered (SRO) structure. Results show that the grain size distribution of the cold-rolledC-2000 alloy followed by annealing at 900 °C is quite uneven. The low-angle grain boundaries induced by cold rolling are more frequently transformed into the Σ3 twin boundaries during recrystallization. At the initial stage of annealing at 900 °C after cold rolling, the contents of different texture components are significantly different, but the differences tend to decrease with the extension of the annealing time. In addition, cold rolling destroys SRO domains formed during solid solution water quenching, and the destruction of SRO affects the precipitation of the long-range ordered phase during annealing. Incoherent Σ3ic with curved grain boundaries play an important role in the recrystallization of nucleation sites in the process of static recrystallization by nucleation–growth.

Controlled-fracture forming for alumina wires and plates I. Cold-working and resintering characteristic

Controlled-fracture Forming for Alumina Wires and Plates II. Microstructural Refinement

Enhanced Tensile Properties And Fracture Reliability Of Cu-Based Amorphous Wires Via Pr-Doping

Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

Wire-based friction stir additive manufacturing towards isotropic high-strength-ductility Al-Mg alloys

The Effects of Cold Rolling and Annealing on the Microstructure Evolution of Ordered C-2000 Alloy during Metallic Wire Preparation

Mechanics of controlled fragmentation by cold drawing

Investigation of Isothermal Continuous Hot Deformation Behavior of the New As-Cast Alumina-Forming Austenitic Alloy

High fracture toughness alumina ceramic materials by elongated grains toughening from induced- seeds

High deformation and delamination mechanisms explained through mesoscale and nanoscale phenomena in pearlitic steel wires

Understanding the Processing Quality Problem for Cutting Ceramic Materials Using the Thermal-Controlled Fracture Method Induced by a Single-Surface Heat Source

Influence of temperature on deformation and damage mechanisms of wire + arc additively manufactured 2219 aluminum alloy

Microstructural modification and enhanced mechanical properties of wire-arc additive manufactured 6061 aluminum alloy via interlayer friction stir processing

Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

The Effect of Process Annealing on the Recrystallization of Lamp Grade Tungsten

Fractal structure and nano-precipitates break comprehensive performance limits of CuCrZr alloys

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Comparative study on the formability and microstructure evolution of different tempered Al–Cu–Li alloy sheets during room and cryogenic temperature forming process

High fracture toughness alumina ceramic materials by elongated grains toughening from induced-seeds