Abstract:Fuel concentration information is critical to the development of high-efficiency combustion system of directinjection natural gas engines. In this study, a one-dimensional (1-D) measurement approach based on laser induced breakdown spectroscopy (LIBS) is developed to quantitatively measure 1-D fuel concentration distributions in gas jets at high ambient pressures. Except for the spectral dimension, another dimension of the intensified charge coupled device (ICCD) is employed for the spatial resolution of measurements. The effects of laser energy and ambient pressure on plasma dynamics are investigated to explore the feasibility of 1-D LIBS in concentration measurements at high ambient pressure. Since the peak intensity ratio (PIR) of H656/N746 shows significant spatial variations in the plasma volume, a 1-D calibration strategy is developed by establishing respective calibration curves at different spatial positions to quantify the fuel concentration distributions. The measurement uncertainties are evaluated, including both the systematic and random errors. The temporal variations of the 1-D fuel concentration distributions in methane jets are presented, and the shot-to-shot fluctuations are analyzed in detail. The results show that the coefficient of variation of equivalence ratio is lowest at the end of injection (EOI), suggesting that ignition at the EOI could enable a relatively stable flame kernel formation. Along the radial direction of the jet, a high ignitable mixture percentage appears at approximately 3.0 mm from the jet axis at the EOI, suggesting an optimal ignition position. The results reveal that the 1-D LIBS could be a powerful tool for calibration of numerical models and optimal designs of combustion engines taking advantage of high-pressure gas jets.

In-Cylinder Mixture Distribution Measurement in a GDI Engine Using Laser-Induced Fluorescence

In-Cylinder Mixture Distribution Research of Stratified Lean-Burn Strategy and Stratified Stoichiometric Strategy in a GDI Engine Using Laser-Induced Fluorescence

In-Cylinder Mixture Distribution of Direct Injection LPG Using Laser-Induced Fluorescence

Co-evaporative multi-component fuel design for in-cylinder PLIF measurement and application in gasoline direct injection research

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Quantitative 1-D LIBS Measurements of Fuel Concentration in Natural Gas Jets at High Ambient Pressure

Leaner lifted-flame combustion with ducted fuel injection: The key role of forced two-stage mixing

Investigation of Flash Boiling Injection Schemes in Lean-Burn Gasoline Direct Injection Engines

Measurement of Soot Distribution in Two Cross-Sections in a Gasoline Direct Injection Engine Using Laser-Induced Incandescence with the Laser Extinction Method

Investigation of Split Flash Boiling Injection Schemes in a Constant Volume Chamber and an Optical GDI Engine under Lean Combustion Condition

High-Speed Photography of Stratified Combustion in an Optical GDI Engine for Different Triple Injection Strategies

Split Injection Flash Boiling Spray for High Efficiency and Low Emissions in a GDI Engine under Lean Combustion Condition

Distributed Gas Ignition Using Injection Strategy for High Efficiency and Clean Combustion under Lean Condition

In-Cylinder Mass Fraction Burned Estimation Using the Spark Plug as Ionization Sensor

Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray

A BASIC STUDY ON THE IGNITION POSITION OF NATURAL GAS DIRECT-INJECTION SUPER-LEAN COMBUSTION

A comparative analysis of the performances of a syngas port injection plus gasoline direct injection combined-injection spark-ignition engine under lean-homogeneous charge and Lean-Stratified Charge modes

Quantitative Soot Concentration Measurement of Flame by Laser Induced Incandescence

Differences in Pool-Fire Induced Soot Production Between Subcooled Spray and Flash Boiling Spray in a DISI Engine