Abstract:Direct carbon solid oxide fuel cells (DC-SOFCs), energy conversion devices with an all-solid-state structure, utilize solid carbon as a fuel to generate electricity in a green and efficient manner. Recently, the use of biomass-derived carbon as a DC-SOFC fuel has become a key research topic owing to the abundance and renewability of biomass. Thus far, for the majority of studies, an anaerobic pyrolysis process is usually needed for converting the biomass to biochar prior to applying DC-SOFCs. In this study, DC-SOFCs were assembled with perovskite-type La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) and Ag-Gd0.2Ce0.8O2-δ as the electrolyte and electrodes, respectively. The electrochemical performance and stability were evaluated for two types of DC-SOFCs: those filled with Camellia oleifera shell biomass as the fuel and those filled with biochar derived from the biomass. The biomass-filled DC-SOFC achieved a maximum power density of 306 mW cm−2 at 800°C, which is close to that of the biochar-filled DC-SOFC (317 mW cm−2). Moreover, discharge test results of constant current indicate that biomass-filled DC-SOFCs have higher fuel utilization. This study verifies the feasibility and potential of loading biomass directly into DC-SOFCs as a carbon source, and reveals that, compared with DC-SOFCs operated with biochar, biomass-filled DC-SOFCs can deliver remarkable electrochemical performance and stability. Thus, a simpler and more convenient way to generate electricity through efficient and clean utilization of biomass energy is identified.

Low-temperature SOFCs Using Biomass-Produced Gases As Fuels

Electromotive Force for Solid Oxide Fuel Cells Using Biomass Produced Gas As Fuel

Low-temperature SOFCs based on Gd0.1Ce0.9O1.95 fabricated by dry pressing

Biomass Carbon Fueled Tubular Solid Oxide Fuel Cells with Molten Antimony Anode

Theoretical Electromotive Force and Performance of SOFC Fed with Different Fuel Gases

Solid Oxide Fuel Cells Using Gas Hydrates for Power and Syngas Cogeneration: A Thermodynamic and Experimental Assessment

Direct liquid methanol-fueled solid oxide fuel cell

Multi-physics field modeling of biomass gasification syngas fueled solid oxide fuel cell

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Highly efficient direct carbon solid oxide fuel cells operated with camellia oleifera biomass

Operation of ceria-electrolyte solid oxide fuel cells on iso-octane–air fuel mixtures

Gadolinium-Doped Ceria–NaCoO2 Heterogeneous Semiconductor Ionic Materials for Solid Oxide Fuel Cell Application

Performance of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Development of Methanol-Fueled Low-Temperature Solid Oxide Fuel Cells

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Ni1−Cu alloy-based anodes for low-temperature solid oxide fuel cells with biomass-produced gas as fuel

Low-temperature ceria-electrolyte solid oxide fuel cells for efficient methanol oxidation

Performance of Solid Oxide Fuel Cells on H-2, Nh3 and Hydrocarbon Fuels

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability