Abstract:The effects of nanosized reinforcement particles on precipitation reactions in age-hardenable Al alloy matrix composites have been largely unknown. In this work, an Al-Zn-Mg-Cu matrix composite reinforced with uniformly distributed TiB2 nanoparticles was successfully produced. The solid-soluted, peak-aged and overaged materials were then characterized, at the atomic scale using (high-resolution) scanning transmission electron microscopy, to provide a fundamental insight into the interface precipitation. Our results demonstrated that the facetted TiB2 nanoparticles have a significant impact on the precipitation in matrix areas adjacent to the TiB2/Al interfaces. The interfaces after solid-solution treatment are tightly-bonded and oxide-free, and display two orientation relationships (ORs): the well-reported [21¯1¯0]TiB2//[101]Al, (0001)TiB2//(1¯11)Al (OR1) and the new [21¯1¯0]TiB2//[101]Al, (011¯0)TiB2//(111¯)Al (OR2). The interface precipitates (i.e. interphase) having the size of several tens of nanometers were formed after ageing and were determined to be (Zn1.5Cu0.5)Mg phase. Their formations were only related to the initial OR1 and OR2 where the mutual ORs between the TiB2, interphase and Al matrix were further developed. Periodically spaced misfit dislocations were revealed at the semi-coherent TiB2/Al interfaces, which are generally considered beneficial to the heterogeneous precipitation. They not only reduced nucleation energy barrier, but also acted as short-circuit diffusion paths for transporting solute atoms and vacancies, accelerating growth rate. However, the growth of interphase at the interface parallel to close-packed {111} Al planes was suppressed by the ultra-low accommodation factor. In addition, such an interface precipitation reduced the mismatch of the TiB2/Al interface, increasing the overall coherency and being potential for effective interface strengthening.

Interface Structure of Al3Ti, Α-Al2o3 and TiB2/Al Composites Fabricated by Exothermic Dispersion Reaction Method

Interfacial Precipitation of the In-Situ TiB2-reinforced Al–Zn–Mg–Cu–Zr Composite

Interface Alloying Design to Improve the Dispersion of TiB<sub>2</sub> Nanoparticles in Al Composites: A First-Principles Study

Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite

Processing of in situ aluminum-matrix composites and controlling of the solidification microstructures

Interface and precipitate investigation of a TiB2 particle reinforced NiAl in-situ composite

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Evaluation of the microstructure of in-situ reaction processed Al3Ti-Al2O3-Al composite

Microstructure evolution during preparation of in-situ TiB reinforced titanium matrix composites

Study on Microstructure of the TiB 2 Reinforced NiAlFe Metal Matrix Composites

Preparation and Characterization of Novel Ti(Al)–TiB2/Ti3Al Metallic-Intermetallic Laminated Composites

Revealing the Phase-Interface Properties of the TiB2/TiAl Composite from a First Principles Calculations

Preparation, Microstructures and Mechanical Properties of In-Situ TiB2/Al Composites by Mechanical Stirring and Subsequent Ultrasonic Treatment

Microstructure of Ti3AI Intermetallic Matrix Composites Produced by In-Situ Reaction

Formation of Laminar Ti-Al-N Solid Solution and Interfacial Atomistic Structure of TiB2-AlN-B4C Composite

The microstructure and properties of in-situ TiB2/6351 Al composites after hot extrusion

Interface Formation and Bonding Control in High-Volume-fraction (tic+tib2)/al Composites and Their Roles in Enhancing Properties

The Structure of Al_3Ti and Reinforcing Mechanism in Composite Al_3Ti/ZL101

In Situ Synchrotron X-ray Diffraction Study of Reaction Routes in Ti-Al3Ti-based Composites: the Effect of Transition Metals on L12 Structure Stabilization

Improvement on Mechanical Property of B4C/Al Composites by Addition of Ti Through Interfacial Reaction

Investigation on the Crystallographic Orientation Relationships and Interface Atomic Structures in an In-Situ Ti2AlN/TiAl Composite