Abstract:Laser Raman spectroscopy (LRS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet and visible diffuse reflectance spectroscopy (UV-DRS), and temperature-programmed reduction (TPR) are used to characterize a series of WO3/CeO2 samples. The results indicate that the dispersion capacity of tungsten oxide is about 4.8W(6+) ions nm(-2)(CeO2) and the structure of the supported tungsten oxide species is closely related to its loading amount on ceria. For the calcined samples, two distinctly different tungsten species have been identified by various methods. At low WO3 loading, only the highly dispersed tungsten oxide species are found on the surface possibly formed by the incorporation of the dispersed W6+ ions into the surface vacant sites of CeO2. increasing the loading amount of tungsten oxide to a value above 4.8W(6+) ions nm(-2)(CeO2) leads to the formation of crystalline WO3. LRS and IR results of WO3/CeO2 samples prepared by using different precursors have shown that calcination has a dramatic effect on the structure of the final product, which might mostly eliminate the differences of the precursors and result in final products with almost a same structure. TPR results of WO3/CeO2, CuO/CeO2, and CuO/WO3-CeO2 samples reveal that the reduction behaviors of CuO dispersed on CeO2 and on WO3 premodified CeO2, i.e., WO3-CeO2, are apparently different. The result emphasizes the importance of the surface structure of the support on the properties of the dispersed metal oxide species; the conclusion is also supported by UV-DRS results. The coordination environments of the dispersed tungsten oxide and copper oxide species are discussed on the basis of the incorporation model (Chen, Y.; Zhang, L. Catal. Lett. 1992, 12, 51).

A monolayer dispersion study of titania-supported copper oxide

A study on the monolayer dispersion of tungsten oxide on anatase

Influence of Titanium Oxide on the Surface Interactions of MO (m=cu and Ni)/γ-Al2O3 Catalysts

Monolayer dispersive supported CuO/γ-Al2O3 catalysts studied by XAFS

Monolayer Dispersive Supported CuOAl2O3 Catalysts Studied by XAFS

Monolayer Dispersive CuO/γ-Al2O3 Catalyst Studied by XAFS

Characterization of copper oxide supported on ceria-modified anatase

Surface Structure Characteristics of CuO/Ti0.5Sn0.5O2 and Its Activity for CO Oxidation

Monolayer dispersive supported CuO/gamma-Al2O3 catalysts studied by XAFS

Surface Interaction Between Copper Oxide and CeO2-γ-Al2O3 Mixed Oxide Support

A Study of Thoria on the Surface of Γ-Al2o3

Influence of Ferric Oxide Modification on the Properties of Copper Oxide Supported on Γ-Alumina

Dispersion and Reduction of Copper Oxide Supported on WO3-modified Ce(0.5)Zr(0.5)O2 Solid Solution.

Dispersion of NiO Supported on Γ-Al2o3 and TiO2/γ-Al2O3 Supports

A Study On The Surface Properties Of Ceria-Supported Tungsten And Copper Oxides

Influence of impregnation times on the dispersion of CuO on anatase

Investigation of surface morphology, structure and electrocatalytic properties for O2 evolution of titanium based IrO2+Ta2O5 coatings

Surface state of NiO supported on γ-Al2O3 and TiO2/γ-Al2O3 supports

Controllable Hydrothermal Synthesis, Optical and Photocatalytic Properties of TiO2 Nanostructures

Studies Of The Dispersion State Of Cuo On Tio2 And Ceo2-Tio2 And Activity For No Plus Co Reaction

Dispersion of Metal Phthalocyanines on Surface of TiO2