Rf SQUID AUTOMATIC CONTROLLING SYSTEM BASED ON EMBEDDED SYSTEMS

WANG YUE,WANG ZHI-JUN,LIU XIN-YUAN,WANG ZHI-QIANG,DAI YUAN-DONG,WANG FU-REN,MA PING,WANG SHOU-ZHENG

DOI: https://doi.org/10.3969/j.issn.1000-3258.2005.z1.051

2005-01-01

Abstract:This paper introduced the applicationof embedded systems in the field of rf SUID automatic controlling system, raised the whole design project. The system working principleand the design idea are describedbriefly.

What problem does this paper attempt to address?

RF SQUID COMPUTER AUTOMATIC MEASUREMENT SYSTEM

Xin-Yuan LIU,YUN BAI,SHU CHEN,WEI ZHAO,BAI-QING XIE,Yuan-Dong Dai,Fu-ren WANG,ZHANG-ZHI LI,Shou-zheng WANG

DOI: https://doi.org/10.3969/j.issn.1000-3258.2005.03.001

2005-01-01

Abstract:The system controlled by Computer in rf SQUID controlling field which can scan automatically and the design of the software and hardware are described briefly.
Automatic Control System for a Multichannel rf SQUID

Ge Xiaofei,Peng Xueming,Wang Xun,Jiang Mi,Ma Ping,Nie Ruijuan,Wang Furen,Dai Yuandong

2008-01-01

Rare Metal Materials and Engineering

Abstract:To facilitate the widespread application of rf SQUID, an automatic control system for a multichannel rf SQUID system was developd. The system had the capacities of adjusting and storing its work point automatically as well as processing and outputing its effect multichannel signals. The operating principle of this control system, the hardware circuits and the relevant software were briefly introduced in this paper.
Design of Regional Water Monitoring and Measuring Instrument Based on Embedded System

Guangzhou Zhao

2006-01-01

Abstract:In order to improve the promptness and intelligence of water monitoring and measuring,a system-embedded(instrument) based on ARM and μC/OS-Ⅱ was introducesd.With the GPRS network technology,the apparatus can bidirectionally communicate with upper-layer controller in real time.The automatically monitoring and measuring ability as well as the quick reaction to water accidents were proved by practical application.
Design and Implementation of Embedded Controller Based on Rabbit2000

黄健,张宏建,胡赤鹰

DOI: https://doi.org/10.3969/j.issn.1002-1841.2004.02.020

2004-01-01

Abstract:In recent years,embedded devices are more widely used than before.Introduces the embedded controller system based on Rabbit2000 microprocessor.The industry meters and devices can be controlled remotely by the system.The architecture and functions of the system are discussed.The hardware and software implement of the embedded controller are also given in detail.The embedded controller posses many features,such as well anti-disturbance,high reliability and high performance-price ratio and its application in industry automation gets satisfied results.
The Research of Positioning System Based on Embedded System

ZHU Yu,ZHANG Xin,LI Bin

DOI: https://doi.org/10.19304/j.cnki.issn1000-7180.2011.04.045

2011-01-01

Abstract:The applications of Embedded wireless sensor is very broad.This paper describes ultrasonic sensor-based targeting system principle,analysis of the interference present in the system and improved anti-jamming algorithm.We use S3C2440A micro-processor.This system composed by ultrasonic receiver and transmitter module,temperature measurement module and LCD module.We use Linux operating system as software platform.the main design of the system control program and the position calculation process,the system Achieved in indoor as well as some of the special and high precision positioning in harsh environments.The system has good computing ability and has good scalability and adaptability.
A Network Control System of Home Appliances Based on Embedded Techniques

GONG Chen,YING Teng-yun,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1002-6886.2007.05.018

2007-01-01

Abstract:Aimed at the need of network and intelligence of today's home electric equipments,a type of intelligence home appliances control system is invented,applying various techniques of wireless network.The system actualizes remote control,real-time monitor and other functions to home appliance,based on embedded techniques.This article introduces the design of the hardware and software of the system.
A design of embedded wireless vehicle information collection system

WU Fan,YANG Zhi-le,LIN Xiao-ling,HAN Zheng-zhi

DOI: https://doi.org/10.3969/j.issn.1000-9787.2013.02.035

2013-01-01

Abstract:A new design scheme for wireless vehicle information collection system based on S3C6410 hardwave platform and embedded WinCE OS is presented.The basic principle and communication mode of the wireless vehicle detecting techniques based on magneto-resistive sensor are studied,and the development of application program interface and function of wireless traffic information collection system based on MFC on WinCE embedded platform is accomplished and tested.Test results shows that the system can realize functions of collecting,storing,transmitting and controlling of information of vehicle in low power consumption condition and works well.
A System Design for the Reader of Microwave Radio Frequency Identification

Changzhan Gu,Zhiguang Fan,Shaoyuan Zheng,Jiangtao Huangfu,Lixin Ran

DOI: https://doi.org/10.2529/piers061129101136

2007-01-01

Abstract:RFID (Radio Frequency Identification) is now attracting many interests for its bright future in commercial and daily use. For the low-frequency (LF, typically 125KHz) and the high-frequency (HF, typically 13.6MHz) RFIDs, the Readers have already come into our daily life out of their matured technologies, while the ultra-high frequency (UHF) RFID Readers are still in the process for the reliability and functionality. This paper represents a systematic design of a UHF RFID reader. Received backscatter modulation waves (carrier wave frequency 915 MHz) are directly demodulated to baseband signals using the Zero IF technology. The reader is designed as a quadrature (I/Q) one, which can avoid null points of the received signals [41 and enhance the demodulation sensitivity.
The application of embedded system on electric devices

Yixuan Lu

DOI: https://doi.org/10.1088/1742-6596/2649/1/012030

2023-12-07

Journal of Physics Conference Series

Abstract:Embedded system control technology is widely used in airborne electronic equipment. Embedded system control technology is at the core of the development process of airborne electronic devices, but currently the overall design of system control for airborne electronic devices is not planned from the top level of the system, which may cause the system control of the device to not fully meet the user's needs in terms of use functions, and the system control software often needs to be modified, wasting a large amount of human, material, and financial resources. Aiming at this, this paper discusses the embedded system control technology and design methods applied in airborne electronic equipment. This article will analyze the current research status of the application of embedded systems in electrical equipment from multiple aspects, and provide prospects for its future development. Through analysis, the entire development process and shortcomings of embedded systems can be clarified, providing reference for their better application in industrial environments in the future.
A New Embedded Control System Design of Multi-Station Feed Mechanism

Feng-lan CHENG,Xi-zhe ZANG,Jie ZHAO

DOI: https://doi.org/10.3969/j.issn.1009-0134.2011.8(x).25

2011-01-01

Abstract:A new embedded control system of multi-station feed mechanism is presented in this paper. In combination with bus framework and modular design method, this paper establishes the corresponding subsystem such as the ARM-based main-controller, pendant and FPGA-based motion-controller. This system has the advantages of easy maintenance, good scalability, outstanding anti-interference and compact configuration.
An Application of Embedded Intelligence in the Automatic Tuning System for VLF Transmitter

Guoqiang Xin,Xiufeng Liu,Changbin Xu,Weinan Liu

DOI: https://doi.org/10.1088/1757-899X/631/3/032035

2019-11-07

IOP Conference Series: Materials Science and Engineering

Abstract:The research focuses on the automatic tuning system for VLF (Very low frequency) transmitter using embedded intelligence, which constructs a modular architecture control system with flexibility and low cost. In this paper, the main problems of the VLF transmitting system are first analysed to determine the target of the automatic tuning system is mainly to match the output impedance of transmitter with the load impedance of antenna quickly and stably at any time. Then the matching network characteristics of the automatic tuning system are studied based on the conjugate matching principle. Besides, the implementation of the embedded control system is also given which composed of concrete design of hardware and realization of software algorithm. Finally, the embedded control system is successfully applied to the automatic tuning prototype for VLF transmitter and the experimental results verify the effectiveness of the embedded control system.
Embedded software design of multifunctional data acquisition system based on Linux

Fu Ning,Zhang Zhen,Qiao Liyan

DOI: https://doi.org/10.3969/j.issn.1002-7300.2008.06.033

2008-01-01

Abstract:Currently,embedded system is used more and more in the industrial measurement and control field,and the embedded software plays a core role in the whole system design.This paper just introduces an embedded software design based on Linux OS and ARM hardware platform,which not only has a perfect user interface,but also provides with short development period,high reliability and expansibility.The whole software has been tested and the experimental results show that the technical performance has met all the design requirements.
System-on-flexible-substrates: Electronics for Future Smart-Intelligent World

Li-Rong Zheng,Majid B. Nejad,Saul Rodriguez,Lu Zhang,Cairong Chen,Hannu Tenhunen

DOI: https://doi.org/10.1109/hdp.2006.1707561

2006-01-01

Abstract:In this paper, we present architecture, circuit implementation and integration issues of embedded smart systems on flexible substrates for future ubiquitous intelligent world. The work is exampled by several concepts of innovative, self-powered, long-range interconnected radio-frequency identification and sensor networks in warehouse and intelligent goods distribution systems. Two types of RFID concepts are designed for this network. The first one is a self-powered, ultra-low power UWB RFID. A power scavenging system is designed which can draw energy from the 802.11 access point and its surrounding electromagnetic waves. In the second demonstration, we developed a chipless passive RFID based on time-domain reflection principle. As this RFID is chipless and needs only interconnections and antenna, it is potentially fully printable on flexible substrate such as a paper board. Finally, some implementation and experimental results are presented
Design of home environment monitoring and early warning system based on Basic RF

Wang Ming-min

Abstract:In accordance with the application demands,a home environment monitoring and early warning system based on Basic RF was designed in combination with Basic RF wireless communication technology,network communication technology and GSM communication technology. The system is composed of information processing subsystem and wireless sensor network subsystem. The wireless sensor network subsystem is built by utilizing Basic RF two way wireless communication protocol of CC2530 combined with application layer algorithm. The data remote transmission is realized by the information processing sub system taking microcontroller STM32 as the core,by means of ENC28J60 network module and SIM900A SMS module. Users can easily monitor the home environmental data through an Internet terminal and receive alarm SMS timely when the environ ment is abnormal. The experimental results show that the system has the advantages of stability,practicality and flexibility,and has a wide application prospect for home environmental monitoring and early warning.

Engineering,Computer Science
Design of Automatic Recharging System of Robot Based on RFID Radio Frequency Technology

Zheng Xiao

DOI: https://doi.org/10.2174/2352096513999200710141148

2021-01-22

Abstract:Background: In order to study the interference of wired transmission mode on robot motion, a mobile robot attitude calculation and debugging system based on radio frequency (RF) technology are proposed. Methods: Microcontroller STM32 has been used as the control core for the attitude information of the robot by using MEMS gyroscope and accelerometer. The optimal attitude Angle of the robot is calculated through nRF24L01, which is the core of the wireless communication module, attitude acquisition module and wireless data communication upper computer application platform. Results: The results show that the positioning accuracy is better than ± 5mm. Conclusion: Radio frequency, automatic recharging, infrared ray, positioning accuracy, radio frequency identification, system structure.
The Research of Applying of the Embedded System in Electronic Jacquard's Control System

ZHANG Hua,HU Xu-dong

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.02.009

2006-01-01

Abstract:The article introduces the method of building embedded Linux.It expatiates on the electronic jacquard control system base on ARM-Linux,including hardware and software.It concerns the solutions of the key difficulties of the project.
DESIGN AND IMPLEMENTATION OF THE RECONFIGURABLE RFID INFORMATION GATHERING SYSTEM

Zhu Weiping,Sheng Huanye,Wang Dong

DOI: https://doi.org/10.3969/j.issn.1000-386X.2007.10.016

2007-01-01

Abstract:A reconfigurable RFID information gathering system is designed and implemented.This system is built on the software bus,and each component is allowed to flexiablely join in,replace with and remove from other components.The system structure can be modified dynamicly through the system configuration table.The main controller could response to the temporary or periodic requirements for reconfiguration.This system can realize reconfiguration dynamicly to adapt to the changes of different standards and requirements.
Design of Smart Home Control System Based on ZigBee and Embedded Web Technology

Lingling Li,Weicheng Xie,Ziyang He,Xin Xu,Changmin Chen,Xiaorong Cui

DOI: https://doi.org/10.1007/978-3-642-33478-8_9

2012-01-01

Abstract:A design of Smart Home Remote Control System is proposed in this paper. It is based on ZigBee and Embedded Web Technology, to monitor and control the home environment remotely. The 32bits-ARM9 processor is the core of the system, and the Embedded Web Server Boa is established with Embedded Linux OS (Operating System). Combining with CGI (Common Gateway Interface) Technology, it is implemented to exchange data and information between the Server and remote users. And ZigBee wireless module CC2430 is to exchange data and information between information appliances and the Server. The experimental results reveal that Smart Home Control System can be achieved.
The Design of the RF Front-End of Reader Based on SAW RFID

fuhai wu,jun huang,cheng ma,yujun leng,jing yang,shilin xiao

DOI: https://doi.org/10.1007/978-3-319-00536-2_100

2014-01-01

Abstract:This paper first describes the system architecture and operating principle of SAW Radio Frequency Identification Devices (RFID). Then it provides the designing scheme to the radio frequency front end of 915 MHz ultra high frequency (UHF) reader. At last, it lists the test method to the RF front end system, and system-level verification of RFID reader. The results show that, this design meets the performance index of 915 MHz reader, and has properties of reliability, efficiency and flexibility in configuration and maintenance.
Design of Feeder Terminal Unit Based on Embedded System

HUANG Hai

DOI: https://doi.org/10.3969/j.issn.1671-5276.2010.06.057

2010-01-01

Abstract:The digital signal processor(DSP) TMS320F2812 and embedded micro-controller(LPC2104) are used to design an intelligent feeder terminal unit(FTU) based on embedded system and the main hardware components are introduced in detail.The paper also analyzes and considers the different interference sources and carries out the anti-interference design of hardware and software to meet the requirements of the high reliability of the distribution automation system.

Rf SQUID AUTOMATIC CONTROLLING SYSTEM BASED ON EMBEDDED SYSTEMS

RF SQUID COMPUTER AUTOMATIC MEASUREMENT SYSTEM

Automatic Control System for a Multichannel rf SQUID

Design of Regional Water Monitoring and Measuring Instrument Based on Embedded System

Design and Implementation of Embedded Controller Based on Rabbit2000

The Research of Positioning System Based on Embedded System

A Network Control System of Home Appliances Based on Embedded Techniques

A design of embedded wireless vehicle information collection system

A System Design for the Reader of Microwave Radio Frequency Identification

The application of embedded system on electric devices

A New Embedded Control System Design of Multi-Station Feed Mechanism

An Application of Embedded Intelligence in the Automatic Tuning System for VLF Transmitter

Embedded software design of multifunctional data acquisition system based on Linux

System-on-flexible-substrates: Electronics for Future Smart-Intelligent World

Design of home environment monitoring and early warning system based on Basic RF

Design of Automatic Recharging System of Robot Based on RFID Radio Frequency Technology

The Research of Applying of the Embedded System in Electronic Jacquard's Control System

DESIGN AND IMPLEMENTATION OF THE RECONFIGURABLE RFID INFORMATION GATHERING SYSTEM

Design of Smart Home Control System Based on ZigBee and Embedded Web Technology

The Design of the RF Front-End of Reader Based on SAW RFID

Design of Feeder Terminal Unit Based on Embedded System