Abstract:NH4Cl corrosion failure often occurs in the overhead systems of hydrotreaters, and this failure is always accompanied by the appearance of H2S. A combination of electrochemical and surface spectroscopic (SEM/EDS, AFM, XRD) techniques was used to investigate the effect of different factors, including the surface roughness, temperature, dissolved oxygen, pH and H2S concentration, on the corrosion behavior of carbon steel in an NH4Cl environment with the presence of H2S. The effect of H2S concentrations (at the ppm level) on the corrosion behavior of carbon steel was systematically revealed. The experimental results clearly indicated that the corrosion rate reached a minimum value at 10 ppm H2S. The steel surface was covered by a uniform corrosion product film in a 10 ppm H2S environment, and the corrosion product film was tight and protective. The ammonia from NH4Cl helped maintaining the protectiveness of the corrosion films in this environment. Dissolved oxygen mainly accelerated the cathodic reaction. The cathodic limiting current density increased with increasing temperature, and the anodic branch polarization curves were similar at different temperatures. The anodic current density decreased as the pH decreased, and the cathodic current density increased as the pH decreased. The absolute surface roughness (R (a)) of carbon steel increased from 132.856 nm at 72 h to 153.973 nm at 144 h, and the rougher surface resulted in a higher corrosion rate. The critical innovation in this research was that multiple influential factors were revealed in the NH4Cl environment with the presence of H2S.

The Influence of Hydrogen Sulfide on Corrosion of Iron under Different Conditions

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

An ac impedance study of the anodic dissolution of iron in sulfuric acid solutions containing hydrogen sulfide

STUDY ON CORROSION AND INHIBITION MECHANISM IN H2S AQUEOUS SOLUTIONS Ⅱ.Passivity and Passive film Breakdown of Carbon Steel under anodic polarization in Alkaline Solutions Containing H2S

INFLUENCE OF SATURATED H_2S ON CORROSION BEHAVIOR OF 316L STAINLESS STEEL

Corrosion of Nickel in Acid Solutions with Hydrogen Sulphide

Electrochemical behaviour of chromium in acid solutions with H2S

Effects of Adding CO2 to Low Level H2S Containing Aqueous Environments on the Corrosion and Hydrogen Penetration Behaviors of High-Strength Steel

Hydrogen Sulfide Corrosion of Metal Equipment in Oil and Gas Field

Effects of H2S/HS− on Stress Corrosion Cracking Behavior of X100 Pipeline Steel Under Simulated Sulfate-Reducing Bacteria Metabolite Conditions

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Impact of SO2 Concentration on the Corrosion Rate of X70 Steel and Iron in Water-Saturated Supercritical CO2 Mixed with SO2

The Investigation of H2S Corrosion of 16MnR Steel and the Rule of Hydrogen Permeation

The influence of sulphur-containing compounds on the anodic processes on iron and stainless steels in strong acids

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium

STUDY ON CORROSION AND INHIBITION MECHANISM IN H2S AQUEOUS SOLUTIONS V .The Inhibition Characteristics of Imidazoline Derivatives in H2S Solutions

Effect of SO42− in aerobic/anaerobic environment and its interaction with HCO3− on corrosion behavior of carbon steel

Impedance investigation of the anodic iron dissolution in perchloric acid solution

Effect of SO 4 2− in aerobic/anaerobic environment and its interaction with HCO 3 − on corrosion behavior of carbon steel

The corrosion behaviour of sulphur on the carbon steel used in oil & gas field with high concentration of H2S