Abstract:The design and development of cost-effective and increased methanol permeable and proton-conductive membranes are critical concerns in the fabrication of polymeric electrolyte membranes (PEM). A solution-casting process was used to create a low-cost PEM based on sulfonated polyvinyl chloride (SPVC)-Polymethyl methacrylate (PMMA) blended with varying concentrations of Poly(sodium 4-styrenesulfonate) (PSS). The contact angle, oxidative stability, swelling ratio, water uptake, and methanol uptake of SPVC/PMMA/PSS membranes were investigated as a function of PSS molar ratio. FT-IR examination, 1 H NMR spectra, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscope micrographs were additionally utilized for confirming the chemical structure, morphology, and thermal stability of SPVC/PMMA/PSS membranes. Furthermore, the ion exchange capacity (IEC), proton conductivity, and methanol permeability of SPVC/PMMA/PSS membranes were investigated depending on the PSS concentration. The results showed a significant increase in proton conductivity from 1.80 × 10 –2 for SPVC/PMMA/1%PSS to 4.7 × 10 –2 S/cm for SPVC/PMMA/5%PSS at ambient temperature. On the other hand, the methanol permeability (P = 8.53 × 10 –8 cm 2 /s) was noticeably lower than that of Nafion 117 (3.39 × 10 –6 cm 2 /s). Additionally, the IEC of the manufactured membrane was 1.38 ± 0.7 meq g −1 for SPVC/PMMA/5%PSS compared to 0.91 meq g −1 for Nafion 117 membranes. The maximum water uptake of the synthesized membranes was 48.37 ± 2.27%, whereas Nafion 117 membrane absorption was 65.44%. According to conductivity studies and the membrane efficiency factor, the ideal PSS content in a polymer matrix is 4 wt.%. Finally, the developed SPVC/PMMA/PSS polyelectrolytic membranes show improvements in essential properties such as methanol permeability, proton conductivity, and IEC when combined with low-cost materials, making them an attractive contender as PEM for DMFCs.

Preparation of Poly(phenylene Oxide-Gstyrenesulfonic Acid) and Their Characterization for DMFC Membrane

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

The Effect of Side Chain Architectures on the Properties and Proton Conductivities of Poly(styrene Sulfonic Acid) Graft Poly(vinylidene Fluoride) Copolymer Membranes for Direct Methanol Fuel Cells

Synthesis and characterization of crosslinked sulfonated poly(arylene ether sulfone) membranes for DMFC applications

Synthesis and Characterization of Α,ω-Bis(2,6-dimethylphenol)-poly(2,6-dimethyl-1,4-phenylene Oxide) Oligomers in Water and the End-Group Modification

Poly(2,6-dimethyl-1,4-phenylene Oxide) (PPO)—A Versatile Starting Polymer for Proton Conductive Membranes (Pcms)

Synthesis and Characterization of Novel Sulfonated Naphthalenic Polyimides As Proton Conductive Membrane for DMFC Applications

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

The Microstructure and Character of the PVDF-g-PSSA Membrane Prepared by Solution Grafting

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

Preparation of Graft Poly(Arylene Ether Sulfone)s-Based Copolymer with Enhanced Phase-Separated Morphology As Proton Exchange Membranes Via Atom Transfer Radical Polymerization

Molecular weight effect of partially sulfonated PS-b-PDMS diblock copolymers as proton exchange membrane for direct methanol fuel cell

Preparation of novel naphthalenic sulfonated polyimide proton conductive membrane

Investigation on sulfonated PVC/polymethyl methacrylate (PMMA)/polystyrene sulfonate (PSS) polymer blends as proton-conducting membrane

PVDF-g-PSSA and Al2O3 composite proton exchange membranes

Preparation and Characterization of Novel Sulfonated Polyimide Proton Conductive Membrane

PVDF-g-PSSA and SiO2 composite proton exchange membranes

Improving Anion Exchange Membranes for DMAFCs by Inter-Crosslinking CPPO/BPPO Blends

Proton Conductor Confinement Strategy for Polymer Electrolyte Membrane Assists Fuel Cell Operation in Wide‐Range Temperature

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs