Acoustic Emission Characteristics and Damage Evolution of Sandstone with Different Pores under External Load
Wencai Wang,Junpeng Li,Chuangye Wang,Zhenyu Pei
DOI: https://doi.org/10.1155/2023/8903428
IF: 1.843
2023-02-22
Advances in Civil Engineering
Abstract:The rock will be damaged and destroyed when the external load reaches the bearing limit, which will be accompanied by complex AE signals and damage evolution laws. Therefore, in order to obtain the relationship between AE signal and damage evolution characteristics of rocks, 4 kinds of sandstones of a mine are used for AE test. Firstly, the porosity of 4 kinds of sandstone is tested. Secondly, the AE signal parameter characteristics of sandstone with different porosity are analyzed. Finally, the AE parameters obtained are combined with cellular automata and damage theory to analyze the damage evolution law and critical damage value of different sandstones. The results show that the pore size of the four sandstones is QSYX > QSYZ > FSYX > FSYZ. The loading process is divided into compaction stage, elastic deformation stage, and plastic deformation stage, with peak strengths of 46.92 MPa, 43.32 MPa, 57.87 MPa, and 54.31 MPa, respectively. Or the AE event rate, the missing area, missing parts and missing number are different. The QSYX missing area is larger than QSYZ and FSYZ; the macrocrack growth speed is also faster; and the signs of fracture are obvious. The number of FSYX missing is more than QSYX, QSYZ, and FSYZ. The first two missing parts are caused by internal defects; the last two missing parts are signs of fracture; QSYX, QSYZ, and FSYZ are shear failure, and FSYX is tensile failure. The damage evolution process of the four sandstones corresponds to the loading process one by one. The calm stage of damage corresponds to the compaction stage, the damage expansion stage corresponds to the elastic deformation stage, and the damage acceleration stage corresponds to the plastic deformation stage. The critical damage values are 0.438, 0.499, 0.576, and 0.476, respectively, which are higher than the critical damage values of the sandstone cell model of 0.43, indicating that when the damage values reach the critical value, instability exists and instability failure will occur with continuous load.
construction & building technology,engineering, civil