Performance Research and Improvement of Ultra-High-speed R290 Rotary Compressor
Hua Zhong,Bowen Lei,Li Zhang,La Da,Che Wang,Jianhua Wu
DOI: https://doi.org/10.1016/j.ijrefrig.2024.06.010
IF: 4.14
2024-01-01
International Journal of Refrigeration
Abstract:With the trend towards miniaturization of rotary compressors, increasing the speed of compressors and improving performance at high speed have become important research directions. Simultaneously, due to the need for refrigerants with low global warming potential (GWP), R290 has become an important alternative to hydrofluorocarbons (HFCs). Under the same compressor structure size, meeting the cooling/heating demands with R290 necessitates higher operating speed owing to its lower cooling capacity per unit volume. In this paper, the performance loss distribution of an ultra-high-speed R290 rotary compressor has been studied theoretically and experimentally, and the accuracy of theoretical calculation was verified through experiments. According to the calculation, the primary factor influencing the performance of the ultra-high-speed rotary compressor is over-compression loss. Consequently, corresponding solutions to improve the performance of the ultra-high-speed compressor were proposed. The internal parameters of the compressor were measured, thereby validating the conclusions and assessing the efficacy of the proposed solutions. Finally, the structure parameters were further optimized, which was also verified by experiments. It is found that the double-valve structure can effectively reduce the over-compression loss. When operating at 10800 rpm under the ASHRAE T1, compared with the prototype, the compressor with double-valve structure can reduce the over-compression loss by 45.0%, and increase the cyclic thermodynamic perfection by 7.85%.