Abstract:With the prevalence of renewable energy sources such as wind power in the power system, analyzing the fault characteristics of systems composed of DFIGs is becoming increasingly important. Therefore, this article analyzes, at first theoretically, the fault characteristics of a doubly fed induction generator (DFIG) during fault periods. It was found that the fault current of the DFIG exhibited the frequency offset phenomenon, which is affected by the depth of voltage dips and can negatively impact traditional distance protection. Furthermore, a method using a dynamic voltage restorer (DVR) based on superconducting magnetic energy storage (SMES) was adopted to compensate for the fault voltage of DFIG, which can mitigate the voltage dips of the DFIG. This method can not only achieve the fault ride through for DFIG but also significantly improve the frequency offset of the fault current during fault periods. Finally, a model composed of a 2.5 MW DFIG-based wind turbine and a 2.5 MW DVR-based SMES was built using a real-time digital simulator (RTDS) platform, and the simulation results showed that the fault stator voltage of DFIG can be compensated at a rated value of 0.69 kV, and the frequency of fault current can be maintained at 50 Hz These results validate the excellent performance of the method in achieving the fault ride through of DFIG and improving the frequency offset of the fault current by comparing multiple type faults while employing different protection methods.

Experimental Study on Fault Ride-through of Wind Turbine With Doubly-fed Induction Generator

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Control Method for Fault Ride-through of DFIG-based Wind Turbines Applied to Weak Grids

Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid Faults

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Analysis of the By-Pass Resistance of an Active Crowbar for Doubly-Fed Induction Generator Based Wind Turbines under Grid Faults

A Review on Low Voltage Ride-through Technologies and Prospect for DFIG Wind Turbines

Improvement of Fault Ride Through Capability of Doubly-Fed Induction Generator Wind Turbines with Hysteresis Controller

Realization of Fault Ride Through for Doubly Fed Induction Generator System with Cascade Converter

Capability of DFIG WTS to ride through recurring asymmetrical grid faults

Fault Modeling and Characteristic Analysis of Offshore Wind Turbines with Doubly Fed Induction Generator

Improved Demagnetization Control of a Doubly-Fed Induction Generator under Balanced Grid Fault

Fault Ride Through Capability Enhancement of Doubly Fed Wind Generator Using Hybrid Protection Circuits

Study on Improving Fault Stability of Doubly Fed Induction Wind Turbine by Using Active-Power Transient Frequency Characteristics

Improvement of Low-Voltage Ride-Through by Coordinated Pitch Control and Crowbar Control for DFIG Wind Turbine

Fault Ride-Through Analysis and Protection of A 2-Mw Dfig Tidal Current Turbine

The Fault Ride-Through Characteristics of a Double-Fed Induction Generator Using a Dynamic Voltage Restorer with Superconducting Magnetic Energy Storage

A Fully Decoupled Feed-Forward Control for Low-Voltage Ride-Through of DFIG Based Wind Turbines

Fault Ride-Through of DFIG Wind Turbine with Rotor Series Resistor

Fault ride-through control and its impacts on wind generators in a VSC-HVDC system