Experimental study on reacting conditions of microwave pyrolyzing sewage sludge induced by active carbon

WAN Liguo,TIAN Yu,ZHANG Lijun,FANG Lin

DOI: https://doi.org/10.3969/j.issn.1674-5906.2010.09.028

2010-01-01

Abstract:It was found that if just the raw sewage sludge was treated in the microwave,high-temperature pyrolysis of the sludge samples could not take place.Active carbon was used to induce pyrolysis of sewage sludge as a suitable microwave absorber.L9(33) orthogonal design was utilized to optimize the experimental parameters.The three factors chosen for test are as follows:the amount of sludge samples,active carbon doping amounts and the input power of microwave radiation,each with three levels.Experimental results showed the optimal conditions:the amount of sludge samples was 30 g,active carbon doping amounts was 6 g and the input power of microwave radiation was 1 200 W.The result of experiment under the optimum program showed that the temperature of the sludge sample could be achieved up to 920 ℃ during 7 minutes.And the sludge samples could be pyrolysized fast and efficiently.Based on the effect of three factors on pyrolysis efficiency,microwave absorbing capability of solid residues under the optimum test scheme and its feasibility as adulterant inducing microwave pyrolysis of sewage sludge were researched.It concluded that solid residues which had good microwave absorbing properties could replace the activated carbon as a more economic and efficient material to induce microwave to pyrolyze sewage sludge.